Put a Device in Quarantine Using Forescout
Table of Contents
Expand all | Collapse all
-
- Integrate IoT Security with AIMS
- Set up AIMS for Integration
- Set up IoT Security and XSOAR for AIMS Integration
- Send Work Orders to AIMS
- Integrate IoT Security with Microsoft SCCM
- Set up Microsoft SCCM for Integration
- Set up IoT Security and XSOAR for SCCM Integration
- Integrate IoT Security with Nuvolo
- Set up Nuvolo for Integration
- Set up IoT Security and XSOAR for Nuvolo Integration
- Send Security Alerts to Nuvolo
- Send Vulnerabilities to Nuvolo
- Integrate IoT Security with ServiceNow
- Set up ServiceNow for Integration
- Set up IoT Security and XSOAR for ServiceNow Integration
- Send Security Alerts to ServiceNow
- Send Vulnerabilities to ServiceNow
- Integrate IoT Security with ServiceNow Service Graph Connector
-
- Integrate IoT Security with Cortex XDR
- Set up Cortex XDR for Integration
- Set up IoT Security and XSOAR for XDR Integration
- Integrate IoT Security with CrowdStrike
- Set up CrowdStrike for Integration
- Set up IoT Security and XSOAR for CrowdStrike Integration
- Integrate IoT Security with Microsoft Defender XDR
- Set up Microsoft Defender XDR for Integration
- Set up IoT Security and Cortex XSOAR for Microsoft Defender XDR Integration
- Integrate IoT Security with Tanium
- Set up Tanium for Integration
- Set up IoT Security and XSOAR for Tanium Integration
-
- Integrate IoT Security with Aruba AirWave
- Set up Aruba AirWave for Integration
- Set up IoT Security and Cortex XSOAR for Aruba AirWave Integration
- View Device Location Information
- Integrate IoT Security with Aruba Central
- Set up Aruba Central for Integration
- Set up IoT Security and XSOAR for Aruba Central Integration
- Integrate IoT Security with Cisco DNA Center
- Set up Cisco DNA Center to Connect with XSOAR Engines
- Set up IoT Security and XSOAR for DNA Center Integration
- Integrate IoT Security with Cisco Meraki Cloud
- Set up Cisco Meraki Cloud for Integration
- Set up IoT Security and XSOAR for Cisco Meraki Cloud
- Integrate IoT Security with Cisco Prime
- Set up Cisco Prime to Accept Connections from IoT Security
- Set up IoT Security and XSOAR for Cisco Prime Integration
- Integrate IoT Security with Network Switches for SNMP Discovery
- Set up IoT Security and Cortex XSOAR for SNMP Discovery
- Integrate IoT Security with Switches for Network Discovery
- Set up IoT Security and Cortex XSOAR for Network Discovery
-
- Integrate IoT Security with Aruba WLAN Controllers
- Set up Aruba WLAN Controllers for Integration
- Set up IoT Security and XSOAR for Aruba WLAN Controllers
- Integrate IoT Security with Cisco WLAN Controllers
- Set up Cisco WLAN Controllers for Integration
- Set up IoT Security and XSOAR for Cisco WLAN Controllers
-
- Integrate IoT Security with Aruba ClearPass
- Set up Aruba ClearPass for Integration
- Set up IoT Security and XSOAR for ClearPass Integration
- Put a Device in Quarantine Using Aruba ClearPass
- Release a Device from Quarantine Using Aruba ClearPass
- Integrate IoT Security with Cisco ISE
- Set up Cisco ISE to Identify IoT Devices
- Set up Cisco ISE to Identify and Quarantine IoT Devices
- Configure ISE Servers as an HA Pair
- Set up IoT Security and XSOAR for Cisco ISE Integration
- Put a Device in Quarantine Using Cisco ISE
- Release a Device from Quarantine Using Cisco ISE
- Apply Access Control Lists through Cisco ISE
- Integrate IoT Security with Cisco ISE pxGrid
- Set up Integration with Cisco ISE pxGrid
- Put a Device in Quarantine Using Cisco ISE pxGrid
- Release a Device from Quarantine Using Cisco ISE pxGrid
- Integrate IoT Security with Forescout
- Set up Forescout for Integration
- Set up IoT Security and XSOAR for Forescout Integration
- Put a Device in Quarantine Using Forescout
- Release a Device from Quarantine Using Forescout
-
- Integrate IoT Security with Qualys
- Set up QualysGuard Express for Integration
- Set up IoT Security and XSOAR for Qualys Integration
- Perform a Vulnerability Scan Using Qualys
- Get Vulnerability Scan Reports from Qualys
- Integrate IoT Security with Rapid7
- Set up Rapid7 InsightVM for Integration
- Set up IoT Security and XSOAR for Rapid7 Integration
- Perform a Vulnerability Scan Using Rapid7
- Get Vulnerability Scan Reports from Rapid7
- Integrate IoT Security with Tenable
- Set up Tenable for Integration
- Set up IoT Security and XSOAR for Tenable Integration
- Perform a Vulnerability Scan Using Tenable
- Get Vulnerability Scan Reports from Tenable
Put a Device in Quarantine Using Forescout
Use IoT Security integration with Forescout to quarantine
devices of concern.
If you want to quarantine a device because
you saw an alert that concerns you, use the quarantine option on
the AlertsSecurity
Alerts page. You can also do this in the
Action menu in the Alerts section on a Device Details page.
Putting
a device in quarantine requires IoT Security owner or administrator
privileges.
- Select an alert on AlertsSecurity Alerts in the IoT Security portal.Click MoreSend toQuarantine via Forescout.Add a comment.After you enter a comment, the Send button changes from gray to blue, indicating that you can proceed.Click Send.IoT Security sets the PanwIoTQuarantine host property to on and the XSOAR engine sends it to all configured Forescout instances using the Forescout API:https://<Forescout_IP_address>/fsapi/niCore/HostsThe instance or instances that have an endpoint with a matching MAC address then take action based on how Forescout administrators choose to use the host property. For example, they might configure Forescout to send a Disconnect-Request message to the switch through which the impacted device accesses the network and disconnects it. When the device reconnects, Forescout assigns the device to a quarantine VLAN where it remains in quarantine while you investigate the cause of the alert. Once it’s resolved, you can then use the Release via Forescoutoption.After you click Send, a link appears. When you click it, a new browser window opens to the XSOAR playbook for this action.To confirm that the command was sent, click the link to the XSOAR playbook for this action.For the link in IoT Security to open the corresponding playbook in Cortex XSOAR, you must already be logged in to your XSOAR instance before clicking it.The green boxes in the playbook indicate that a particular step was successfully performed. Following the path through the playbook gives you feedback about whether an action was carried out successfully or, if not, where the process changed course.