GTP Log Fields
Focus
Focus

GTP Log Fields

Table of Contents

GTP Log Fields

Format: FUTURE_USE, Receive Time, Serial Number, Type, Threat/Content Type, FUTURE_USE, Generated Time, Source Address, Destination Address, FUTURE_USE, FUTURE_USE, Rule Name, FUTURE_USE, FUTURE_USE, Application, Virtual System, Source Zone, Destination Zone, Inbound Interface, Outbound Interface, Log Action, FUTURE_USE, Session ID, FUTURE_USE, Source Port, Destination Port, FUTURE_USE, FUTURE_USE, FUTURE_USE, Protocol, Action, GTP Event Type, MSISDN, Access Point Name, Radio Access Technology, GTP Message Type, End User IP Address, Tunnel Endpoint Identifier1, Tunnel Endpoint Identifier2, GTP Interface, GTP Cause, Severity, Serving Country MCC, Serving Network MNC, Area Code, Cell ID, GTP Event Code, FUTURE_USE, FUTURE_USE, Source Location, Destination Location, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, Tunnel ID/IMSI, Monitor Tag/IMEI, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, FUTURE_USE, Start Time, Elapsed Time, Tunnel Inspection Rule, Remote User IP, Remote User ID, UUID for rule, PCAP ID, High Resolution Timestamp, A Slice Service Type, A Slice Differentiator, Application Subcategory, Application Category, Application Technology, Application Risk, Application Characteristic, Application Container, Application SaaS, Application Sanctioned State
Field Name
Description
Receive Time (receive_time or cef-formatted-receive_time)
Month, Day and time the log was received at the management plane.
Serial Number (serial)
Serial number of the firewall that generated the log.
Type (type)
Specifies the type of log; value is GTP.
Threat/Content Type (subtype)
Subtype of traffic log; values are start, end, drop, and deny
  • Start—session started
  • End—session ended
  • Drop—session dropped before the application is identified and there is no rule that allows the session.
  • Deny—session dropped after the application is identified and there is a rule to block or no rule that allows the session.
Generated Time (time_generated or cef-formatted-time_generated)
Time the log was generated on the dataplane.
Source Address (src)
Source IP address of packets in the session.
Destination Address (dst)
Destination IP address of packets in the session.
Rule Name (rule)
Name of the Security policy rule in effect on the session.
Application (app)
Tunneling protocol used in the session.
Virtual System (vsys)
Virtual System associated with the session.
Source Zone (from)
Source zone of packets in the session.
Destination Zone (to)
Destination zone of packets in the session.
Inbound Interface (inbound_if)
Interface that the session was sourced from.
Outbound Interface (outbound_if)
Interface that the session was destined to.
Log Action (logset)
Log Forwarding Profile that was applied to the session.
Session ID (sessionid)
Session ID of the session being logged.
Source Port (sport)
Source port utilized by the session.
Destination Port (dport)
Destination port utilized by the session.
IP Protocol (proto)
IP protocol associated with the session.
Action (action)
Action taken for the session; possible values are:
  • allow—session was allowed by policy
  • deny—session was denied by policy
GTP Event Type (event_type)
Defines event triggered by a GTP message when checks in GTP protection profile are applied to the GTP traffic. Also triggered by the start or end of a GTP session.
MSISDN (msisdn)
Service identity associated with the mobile subscriber composed of a Country Code, National Destination Code and a Subscriber. Consists of decimal digits (0-9) only with a maximum of 15 digits.
Access Point Name (apn)
Reference to a Packet Data Network Data Gateway (PGW)/ Gateway GPRS Support Node in a mobile network. Composed of a mandatory APN Network Identifier and an optional APN Operator Identifier.
Radio Access Technology (rat)
Type of technology used for radio access. For example, EUTRAN, WLAN, Virtual, HSPA Evolution, GAN and GERAN.
GTP Message Type (msg_type)
Indicates the GTP message type.
End IP Address (end_ip_adr)
IP address of a mobile subscriber allocated by a PGW/GGSN.
Tunnel Endpoint Identifier1 (teid1)
Identifies the GTP tunnel in the network node. TEID1 is the first TEID in the GTP message.
Tunnel Endpoint Identifier2 (teid2)
Identifies the GTP tunnel in the network node. TEID2 is the second TEID in the GTP message.
GTP Interface (gtp_interface)
3GPP interface from which a GTP message is received.
GTP Cause (cause_code)
GTP cause value in logs responses which contain an Information Element that provides information about acceptance or rejection of GTP requests by a network node.
Severity (severity)
Severity associated with the event; values are informational, low, medium, high, critical.
Serving Network MCC (mcc)
Mobile country code of serving core network operator.
Serving Network MNC (mnc)
Mobile network code of serving core network operator.
Area Code (area_code)
Area within a Public Land Mobile Network (PLMN).
Cell ID (cell_id)
Base station within an area code.
GTP Event Code (event_code)
Event code describing the GTP event.
Source Location (srcloc)
Source country or Internal region for private addresses; maximum length is 32 bytes.
Destination Location (dstloc)
Destination country or Internal region for private addresses; maximum length is 32 bytes.
Tunnel ID/IMSI (imsi)
International Mobile Subscriber Identity (IMSI) is a unique number allocated to each mobile subscriber in the GSM/UMTS/EPS system. IMSI shall consist of decimal digits (0 through 9) only and maximum number of digits allowed are 15.
Monitor Tag/IMEI (imei)
International Mobile Equipment Identity (IMEI) is a unique 15 or 16 digit number allocated to each mobile station equipment.
Start Time (start)
Time of session start.
Elapsed Time (elapsed)
Elapsed time of the session.
Tunnel Inspection Rule
(tunnel_insp_rule)
Name of the tunnel inspection rule matching the cleartext tunnel traffic
Remote User IP (remote_user_ip)
IPv4 or IPv6 address used by a remote user.
Remote User ID (remote_user_id)
IMSI identity of a remote user, and if available, one IMEI identity and/or one MSISDN identity.
UUID for rule (rule_uuid)
Universally Unique ID for rule.
PCAP ID (pcap_id)
Unique packet capture ID that is used to locate the pcap file saved on the firewall.
High Resolution Timestamp (high_res_timestamp)
Time in milliseconds the log was received at the management plane.
The format for this new field is YYYY-MM-DDThh:ss:sssTZD:
  • YYYY—Four digit year
  • MM—Two-digit month
  • DD—Two-digit day of the month (01 through 31)
  • T—Indicator for the beginning of the timestamp
  • hh—Two-digit hour using 24-hour time (00 through 23)
  • mm—Two-digit minute (00 through 59)
  • ss—Two-digit second (00 through 60)
  • sss—One or more digits for millisecond
  • TZD—Time zone designator (+hh:mm or -hh:mm)
The High Resolution Timestamp is supported for logs received from managed firewalls running PAN-OS 10.2 and later releases. Logs received from managed firewalls running PAN-OS 9.1 and earlier releases display a 1969-12-31T16:00:00:000-8:00 timestamp regardless of when the log was received.
A Slice Service Type (nsdsai_sst)
The A Slice Service Type of the Network Slice ID.
A Slice Differentiator (nsdsai_sd)
The A Slice Differentiator of the Network Slice ID.
Application Subcategory (subcategory_of_app)
The application subcategory specified in the application configuration properties.
Application Category (category_of_app)
The application category specified in the application configuration properties. Values are:
  • business-systems
  • collaboration
  • general-internet
  • media
  • networking
  • saas
Application Technology (technology_of_app)
The application technology specified in the application configuration properties. Values are:
  • browser-based
  • client-server
  • network-protocol
  • peer-to-peer
Application Risk (risk_of_app)
Risk level associated with the application (1=lowest to 5=highest).
Application Characteristic (characteristic_of_app)
Comma-separated list of applicable characteristic of the application
Application Container (container_of_app)
The parent application for an application.
Application SaaS (is_saas_of_app)
Displays 1 if a SaaS application or 0 if not a SaaS application.
Application Sanctioned State (sanctioned_state_of_app)
Displays 1 if application is sanctioned or 0 if application is not sanctioned.
Application Subcategory (subcategory_of_app)
The application subcategory specified in the application configuration properties.