You can monitor the status of transceivers
in your physical appliance or device to enable easier installation
and troubleshooting. Through transceiver monitoring, also known
as digital optical monitoring (DOM), you can view diagnostics like
transmitted bias current, transmitted power, received power, transceiver temperature,
and power supply voltage. See below for a list of devices that support transceiver
monitoring.
PA-800 Series
PA-3200 Series
PA-3400 Series
PA-5200 Series
PA-5400 Series
PA-7000 Series
Use the Command Line Interface to run transceiver monitoring.
See the following table for all available CLI commands.
If you run commands on an incompatible transceiver, the
CLI will return 'n/a' for any diagnostic information it cannot read.
CLI
Definition
show transceiver <interface name>
View a summary of the specified transceiver
with values for each diagnostic.
Example:
admin@PA-7080> show transceiver ethernet11/25
The
CLI will return values for Temperature, Voltage, Current, Tx Power,
and Rx Power.
show transceiver-detail <interface name>
Receive more detailed transceiver specifications,
including vendor information and link lengths. The CLI will also
provide more detailed diagnostic information.
show transceiver all
View a list of all active transceivers as well
as a summary of each of their diagnostics.
show transceiver-detail all
Get comprehensive details on each transceiver
in the device.
