PAN-OS 10.2.2 Addressed Issues
Table of Contents
Expand All
|
Collapse All
Next-Generation Firewall Docs
-
Cloud Management of NGFWs
- Cloud Management of NGFWs
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0 (EoL)
- PAN-OS 11.1 & Later
- PAN-OS 9.1 (EoL)
-
-
-
- Configure a Filter Access List
- Configure a Filter Prefix List
- Configure a Filter Community List
- Configure a BGP Filter Route Map
- Configure a Filter Route Maps Redistribution List
- Configure a Filter AS Path Access List
- Configure an Address Family Profile
- Configure a BGP Authentication Profile
- Configure a BGP Redistribution Profile
- Configure a BGP Filtering Profile
- Configure an OSPF Authentication Profile
- Configure a Logical Router
- Configure a Static Route
- Configure OSPF
- Configure BGP
- Configure an IPSec Tunnel
- Web Proxy
- Cheat Sheet: GlobalProtect for Cloud Management of NGFWs
-
PAN-OS 10.1
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0 (EoL)
- PAN-OS 11.1 & Later
-
- Tap Interfaces
-
- Layer 2 and Layer 3 Packets over a Virtual Wire
- Port Speeds of Virtual Wire Interfaces
- LLDP over a Virtual Wire
- Aggregated Interfaces for a Virtual Wire
- Virtual Wire Support of High Availability
- Zone Protection for a Virtual Wire Interface
- VLAN-Tagged Traffic
- Virtual Wire Subinterfaces
- Configure Virtual Wires
- Configure an Aggregate Interface Group
- Configure Bonjour Reflector for Network Segmentation
- Use Interface Management Profiles to Restrict Access
-
- DNS Overview
- DNS Proxy Object
- DNS Server Profile
- Multi-Tenant DNS Deployments
- Configure a DNS Proxy Object
- Configure a DNS Server Profile
- Use Case 1: Firewall Requires DNS Resolution
- Use Case 2: ISP Tenant Uses DNS Proxy to Handle DNS Resolution for Security Policies, Reporting, and Services within its Virtual System
- Use Case 3: Firewall Acts as DNS Proxy Between Client and Server
- DNS Proxy Rule and FQDN Matching
-
- NAT Rule Capacities
- Dynamic IP and Port NAT Oversubscription
- Dataplane NAT Memory Statistics
-
- Translate Internal Client IP Addresses to Your Public IP Address (Source DIPP NAT)
- Enable Clients on the Internal Network to Access your Public Servers (Destination U-Turn NAT)
- Enable Bi-Directional Address Translation for Your Public-Facing Servers (Static Source NAT)
- Configure Destination NAT with DNS Rewrite
- Configure Destination NAT Using Dynamic IP Addresses
- Modify the Oversubscription Rate for DIPP NAT
- Reserve Dynamic IP NAT Addresses
- Disable NAT for a Specific Host or Interface
-
- Network Packet Broker Overview
- How Network Packet Broker Works
- Prepare to Deploy Network Packet Broker
- Configure Transparent Bridge Security Chains
- Configure Routed Layer 3 Security Chains
- Network Packet Broker HA Support
- User Interface Changes for Network Packet Broker
- Limitations of Network Packet Broker
- Troubleshoot Network Packet Broker
-
-
PAN-OS 10.2
- Cloud Management and AIOps for NGFW
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0 (EoL)
- PAN-OS 11.1
- PAN-OS 11.2
- PAN-OS 8.1 (EoL)
- PAN-OS 9.0 (EoL)
- PAN-OS 9.1 (EoL)
-
- Content Inspection Features
- URL Filtering Features
- Panorama Features
- Networking Features
- GlobalProtect Features
- Management Features
- Decryption Features
- App-ID Features
- IoT Security Features
- Mobile Infrastructure Security Features
- Authentication Features
- Virtualization Features
- Hardware Features
- Enterprise Data Loss Prevention Features
-
- PAN-OS 10.2.10 Known Issues
- PAN-OS 10.2.10-h10 Addressed Issues
- PAN-OS 10.2.10-h9 Addressed Issues
- PAN-OS 10.2.10-h7 Addressed Issues
- PAN-OS 10.2.10-h5 Addressed Issues
- PAN-OS 10.2.10-h4 Addressed Issues
- PAN-OS 10.2.10-h3 Addressed Issues
- PAN-OS 10.2.10-h2 Addressed Issues
- PAN-OS 10.2.10 Addressed Issues
-
- PAN-OS 10.2.7 Known Issues
- PAN-OS 10.2.7-h19 Addressed Issues
- PAN-OS 10.2.7-h18 Addressed Issues
- PAN-OS 10.2.7-h16 Addressed Issues
- PAN-OS 10.2.7-h12 Addressed Issues
- PAN-OS 10.2.7-h8 Addressed Issues
- PAN-OS 10.2.7-h6 Addressed Issues
- PAN-OS 10.2.7-h3 Addressed Issues
- PAN-OS 10.2.7-h1 Addressed Issues
- PAN-OS 10.2.7 Addressed Issues
PAN-OS 10.2.2 Addressed Issues
PAN-OS® 10.2.2 addressed issues.
Issue ID | Description |
---|---|
PAN-231823
|
A fix was made to address CVE-2024-5916.
|
PAN-193579 | Fixed an issue where new logs viewed from
the CLI (show log <log_type>) and new syslogs forwarded to a
syslog server contained additional, erroneous entries. |
PAN-192930 | Fixed an issue where, when the default port
was not TCP/443, implicitly used SSL applications were blocked by
the Security policy as an SSL application and did not shift to the
correct application. |
PAN-192880 | Fixed an issue where, when the firewall
was configured for jumbo frames, an internal interface was not set
with the correct MTU, which caused byte frames larger than 1500
to be dropped when a DF bit was set. |
PAN-192725 | Fixed an issue where the firewall failed
to forward logs to Panorama when configured with IPv6 addressing
only. |
PAN-192089 | Fixed an issue on the web interface where
the IPSec tunnel did not gray out after disabling it. |
PAN-191629 | (PA-5450 firewalls only) Fixed
an issue where the hourly summary log was limited to 100,001 lines
when summarized, which resulted in inconsistent report results when
using summary logs. |
PAN-191513 | Fixed an issue on multi-vsys firewalls where
the DLP cloud service continued to exclude an application added
to a shared application group (ObjectsApplication Filters) from non-file
traffic inspection. This issue occurred when the application was
removed from the application group or filter that was added to the App Exclusion
List (ObjectsDLPData Filtering Profiles). |
PAN-191470 | Fixed an issue on Panorama where encrypted
passwords were sent to firewalls on PAN-OS 10.1 releases during
a multi-device group push, which caused client-based External Dynamic
Lists (EDL) to fail. |
PAN-191466 | Fixed an issue where you were unable to
use the web interface to override IPsec tunnels pushed from Panorama |
PAN-191288 | Fixed an issue where the firewall restarted
due to a dnsproxy process crash. |
PAN-190811 | (PA-5450 firewalls only) Fixed
an issue where logs were forwarded through the management interface
instead of the configured log interface to be used for forwarding. |
PAN-190675 | Fixed an IoT cloud connectivity issue with
the firewall dataplane when the Data Services service
route was used and the egress interface had VLAN tagging. |
PAN-190492 | Fixed an issue where the Panorama log collector
group level SSH settings were not migrated to the new format when
upgrading from a PAN-OS 9.1 release to a PAN-OS 10.0 release. |
PAN-189429 | Fixed a memory leak that occurred when enabling
XFF (x-forwarded-for) logging in a Security policy. |
PAN-189395 | (PA-400 Series firewalls only)
Fixed an issue where running a PAN-OS 10.2 release caused dataplane
processes to restart unexpectedly. |
PAN-189010 | Fixed an issue on Panorama where a deadlock
in the configd process caused both the web interface
and the CLI to be inaccessible. |
PAN-188872 | Fixed an OOM condition caused by a memory
leak issue on the useridd process. |
PAN-188833 | Fixed an issue where shared address objects
used as a source or destination in policies were cloned but not
freed back after configuration commits. |
PAN-188097 | Fixed an issue where the firewall stopped
allocating new sessions with increments in the counter session_alloc_failure.
This was caused by GPRS tunneling protocol (GTP-U) tunnel session
aging processing issue. |
PAN-187558 | Fixed an issue where the following error
message flooded the system log: Incremental update to DP failed. |
PAN-187429 | (PA-3400 Series firewalls and PA-5410,
PA-5420, and PA-5430 firewalls only) Fixed an issue where the
CLI and SNMP MIB walk did not display the model and serial number
of the fan tray and PSUs. |
PAN-187151 | Fixed an issue where tunnel-monitoring interface
was incorrectly shown as up instead of down. |
PAN-186913 | Fixed an issue on Panorama where Validate
Device Group (CommitCommit and Push) incorrectly
issued a commit all operation instead of a validate all operation.
This issue occurred when multiple device groups were included in
the push. |
PAN-186750 | Fixed an issue where, after upgrading to
a PAN-OS 10.1 release, SaaS reports generated on Panorama did not
display Applications at a glance and most
charts were missing data on the right side of the chart. |
PAN-185844 | Fixed an issue where Decryption Log entries
were associated with the wrong Security policy rule. |
PAN-185558 | Fixed an issue where Panorama log migration
failed when old logs migrated to a newer format. This was due to
older indices failing to close. |
PAN-184474 | Fixed an issue where, when the firewall
had Advanced Routing enabled, a static route remained active after
an interface went down. |
PAN-183579 | Fixed an issue where SD-WAN path monitoring
failed over the interface directly connected to the ISP due to an
unsupported ICMP probe format. |
PAN-183319 | Fixed an issue on Panorama where commits
remained at 99% due to multiple firewalls sending out CSR singing
requests every 10 minutes. |
PAN-182087 | Fixed an issue where commit failures occurred
due to validity checks performed against self-signing certificates
not evaluating Authentication Key Identifier and Subject
Key Identifier fields were present. |
PAN-180396 | Fixed an issue where Panorama displayed
an error when generating a ticket to disable GlobalProtect for Prisma
Access. |
PAN-180147 | Fixed an issue where the bcm.log and brdagent_stdout.log-<datestamp> files
filled up the root disk space. |
PAN-178450 | Fixed an issue where icons weren't displayed
for clientless VPN applications. |
PAN-177671 | Fixed an issue where, when SIP traffic traversing
the firewall was sent with a high Quality of Service (QoS) differentiated
service code (DSCP) value, the DSCP value was reset to the default
setting (CS0) for the first data packet. |
PAN-177455 | PA-7000 Series firewalls with HA clustering
enabled and using HA4 communication links only) Fixed an issue
where loading PAN-OS 10.2.0 on the firewall caused the PA-7000 100G
NPC (Network Processing Card) to go offline. As a result, the firewall
failed to boot normally and entered maintenance. |
PAN-176156
|
Fixed an issue where executing the show running
resource-monitor with the
ingress-backlogs option enabled
displayed the error message `Dataplane is not up or invalid
target-dp(*.dp*)`.
|
PAN-174345 | Fixed an issue where a process all_pktproc stopped
responding after upgrading the firewall. |