Focus

PAN-OS Web Interface Help

Cluster Config

Table of Contents

Cluster Config

Add members of an HA cluster.

Device > High Availability > Cluster Config

Add members to an HA cluster by selecting DeviceHigh AvailabilityCluster Config.

Cluster Config	Description
Add	Add a cluster member. You must add the local firewall and if you are using HA pairs, you must add both HA peers of the pair as cluster members. (`Supported firewalls`) Device Serial Number—Enter the unique serial number of the cluster member. (`Panorama`) Device—Select a device from the dropdown and enter a Device Name. HA4 IP Address—Enter the IP address of the HA4 link for the cluster member. HA4 Backup IP Address—Enter the IP address of the backup HA4 link for the cluster member. Session Synchronization—Select to enable session synchronization with this cluster member. Description—Enter helpful description.
Delete	Select one or more cluster members and Delete them from the cluster.
Enable	(`Supported firewalls`) You can determine whether or not a cluster member synchronizes sessions with other members. By default, all members are allowed to synchronize sessions. If you disable synchronization for one or more members, select Enable to re-enable synchronization for one or more members.
Disable	(`Supported firewalls`) Select one or more members and Disable synchronization with other members.
Refresh	(`Panorama`) Select Refresh to refresh the list of HA devices in the HA cluster.

HA Active/Active Config

Device > Log Forwarding Card