Set Commands Changed in PAN-OS 11.2
Table of Contents
PAN.OS 11.2
Expand all | Collapse all
-
- Set Commands Introduced in PAN-OS 11.1
- Set Commands Removed in PAN-OS 11.1
- Show Commands Introduced in PAN-OS 11.1
- Set Commands Introduced in PAN-OS 11.2
- Set Commands Changed in PAN-OS 11.2
- Set Commands Removed in PAN-OS 11.2
- Show Commands Introduced in PAN-OS 11.2
- Show Commands Removed in PAN-OS 11.2
Set Commands Changed in PAN-OS 11.2
Command line interface 'set' commands that are changed in PAN-OS 11.2:
The following commands are modified in the 11.2 release.
The ha1-a|ha1-b options were added to the following
commands.
set deviceconfig high-availability interface ha1 port set deviceconfig high-availability interface ha1-backup port
The hsci option was added to the following commands.
set deviceconfig high-availability interface ha2 port set deviceconfig high-availability interface ha2-backup port set deviceconfig high-availability interface ha3 port
The minimum value for the following commands were changed to 100.
set network profiles bfd-profile <name> min-tx-interval set network profiles bfd-profile <name> min-rx-interval
The auto options was changed to value for the following commands.
set network interface ethernet <name> link-speed set network interface ethernet <name> link-duplex
The cellular option was added to the following
command.
set network virtual-router <name> routing-table ip static-route <name> path-monitor monitor-destinations <name> source
The validate option was removed from the following
command.
set network routing-profile filters prefix-list <name> type ipv4 ipv4-entry <name> prefix entry network
The local deep learning option was added and imsi, imei, source
uuid, dest uuid options were removed from the following command.
set shared reports <name> type threat group-by set shared reports <name> type threat group-by
The imsi, imei options were removed from the following commands.
set shared reports <name> type wildfire group-by set shared reports <name> type url group-by set shared reports <name> type data group-by set shared reports <name> type traffic group-by set shared reports <name> type thsum group-by set shared reports <name> type trsum group-by set shared reports <name> type urlsum group-by set reports <name> type wildfire group-by set reports <name> type url group-by set reports <name> type data group-by set reports <name> type traffic group-by set reports <name> type thsum group-by set reports <name> type trsum group-by set reports <name> type urlsum group-by
The project name options was added to the following command.
set shared reports <name> type globalprotect group-by set reports <name> type globalprotect group-by
The 3 option was set as the max for the following command.
set global-protect global-protect-gateway <name> gp-gw-dhcp entry retry-time
The 30 option was set as the max for the following command.
set global-protect global-protect-gateway <name> gp-gw-dhcp entry dhcp-timeout
The alert option was added to the following command.
set profiles wildfire-analysis <name> mica-engine-wildfire-rules <name> action