>
    Configure a Layer 2 Interface, Subinterface, and VLAN
    Focus
    Download PDF
    Focus
    1. Home
    2. PAN-OS
    3. Configure Interfaces
    4. Layer 2 Interfaces
    5. Configure a Layer 2 Interface, Subinterface, and VLAN
    Download PDF

    Configure a Layer 2 Interface, Subinterface, and VLAN

    Table of Contents

    Configure a Layer 2 Interface, Subinterface, and VLAN

    Configure Layer 2 Interfaces with VLANs when you want Layer 2 switching and traffic separation among VLANs. You can optionally control non-IP protocols between security zones on a Layer 2 interface or between interfaces within a single zone on a Layer 2 VLAN.
    1. Configure a Layer 2 interface and subinterface and assign a VLAN ID.
      1. Select NetworkInterfacesEthernet and select an interface. The Interface Name is fixed, such as ethernet1/1.
      2. For Interface Type, select Layer2.
      3. Select the Config tab.
      4. For VLAN, leave the setting None.
      5. Assign the interface to a Security Zone or create a New Zone.
      6. Click OK.
      7. With the Ethernet interface highlighted, click Add Subinterface.
      8. The Interface Name remains fixed. After the period, enter the subinterface number, in the range 1 to 9,999.
      9. Enter a VLAN Tag ID in the range 1 to 4,094.
      10. Assign the subinterface to a Security Zone.
      11. Click OK.
    2. Commit.
      Click Commit.
    3. (Optional) Apply a Zone Protection profile with protocol protection to control non-IP protocol packets between Layer 2 zones (or between interfaces within a Layer 2 zone).
      Configure Protocol Protection.

    © 2024 Palo Alto Networks, Inc. All rights reserved.