Run the API Script Used to Retrieve Prisma Access IP Addresses

1. Get the API key.

   You need this key to authenticate to Prisma Access and retrieve the list of IP addresses using the API command. Only a Panorama administrator or Superuser can generate or access this API key.

   1. Select PanoramaCloud ServicesConfigurationService Setup.
   2. Select Generate API Key.
      If you have already generated an API key, the Current Key displays. If you haven’t yet generated a key or want to replace the existing key to meet audit or compliance check for key rotation, click Generate New API Key for a new key.
2. Create a .txt file and put the API command options in the file.

   Using the API the command to use is a two-step process. First, you create a .txt file, specifying the parameters for the IP addresses to retrieve, and save the file in a folder that is reachable from the location where you run the command. Then, you run the API and specify the name and location of the .txt file you created in the command.

   Specify the following keywords and arguments in the .txt file. See API Examples for Retrieving Prisma Access IP Addresses for examples. The examples in this document use a file name of options.txt but you can specify any file name, as long as you reference it in the command.

   Argument	Possible choices (keywords)	Comments
   serviceType	all remote_network gp_gateway gp_portal clean_pipe swg_proxy rbi	all—Retrieves IP addresses you need to add to an allow list for all service types (Remote Networks, Mobile Users (both gateways and portals), and Clean Pipe, as applicable to your deployment). remote_network—Retrieves IP addresses you need to add to an allow list for remote network deployments. gp_gateway—Retrieves the Mobile Users—GlobalProtect gateway IP addresses you need to add to an allow list for mobile user deployments. gp_portal —Retrieves the Mobile Users—GlobalProtect portal IP addresses you need to add to an allow list for mobile user deployments. clean_pipe—Retrieves the IP addresses you need to add to an allow list for clean pipe deployments. swg_proxy—Retrieves the egress IP addresses for each deployed Explicit Proxy location, the authentication cache service (ACS), and the network load balancers. rbi—Retrieves the egress IP addresses you need to add to an allow list for Remote Browser Isolation (RBI) deployments to connect to SaaS Applications.
   addrType	all active service_ip auth_cache_service network_load_balancer	all or active—Retrieves all the IP addresses you need to add to an allow list. This API does not retrieve loopback IP addresses. To retrieve loopback IP addresses, use the legacy API. service_ip—Retrieves the Service IP Address, which you use as the peer IP address when you set up the IPSec tunnel for the remote network connection. auth_cache_service—Retrieves the IP address for the explicit proxy ACS (applicable to Explicit Proxy deployments only). network_load_balancer—Retrieves the IP address for the explicit proxy network load balancer (applicable to Explicit Proxy deployments only).
   actionType	pre_allocate	Mobile User deployments only—An actionType of pre_allocate allows you to retrieve IP addresses or subnets for Prisma Access gateways and portals for mobile user deployments. Use this with a serviceType of gp_gateway to retrieve pre-allocated gateway IP addresses and a serviceType of gp_portal to retrieve pre-allocated portal IP addresses. Retrieving the pre-allocated IP addresses lets you add the gateway and portal IP addresses to your organization’s allow lists before you onboard mobile user locations, which in turn gives mobile users access to external SaaS apps immediately after you onboard the locations.
   location	all deployed	all—Retrieves the IP addresses from all locations. For mobile user deployments, this keyword retrieves the IP addresses for both locations you added during onboarding, and locations you did not add. deployed—Retrieves IP addresses in all locations that you added during mobile user onboarding. This keyword is applicable to mobile user deployments only. Prisma Access associates IP addresses for every mobile user location during provisioning, even if you didn’t select that location during mobile user onboarding. If you specify all, the API command retrieves the IP addresses for all mobile user locations, including ones you didn’t select for the deployment. If you specify deployed, the API command retrieves only the IP addresses for the locations you selected during onboarding.

   Specify the options in the .txt file in the following format:

     {
      "serviceType": "service-type",   
      "addrType": "address-type",
      "location": "location"
      }

3. Enter the following command to retrieve the IP addresses:

   • To use the newer API that was introduced in Prisma Access 2.1, enter the following command:

       curl -X POST --data @option.txt -H header-api-key:Current-API-Key "https://api.prod.datapath.prismaaccess.com/getPrismaAccessIP/v2"

     As of May 2023, some Panorama managed deployments use https://api.prod6.datapath.prismaaccess.com/getPrismaAccessIP/v2 (note the prod6 in the URL instead of prod).
   • To use the legacy API, enter the following command. This command uses a legacy API endpoint that will be deprecated in May 2022:

       curl -X POST --data @option.txt -k -H header-api-key:Current-API-Key "https://api.gpcloudservice.com/getPrismaAccessIP/v2"

   Where option.txt is the .txt file you created in a previous step and Current-API-Key is the Prisma Access API key.

   For example, given a .txt filename of option.txt and an API key of 12345abcde, use the following API command to retrieve the public IP address for all locations:

     curl -X POST --data @option.txt -H header-api-key:12345abcde "https://api.prod.datapath.prismaaccess.com/getPrismaAccessIP/v2"

   The API command can return a large amount of information. To make the output more readable, if you have Python installed, you can add | python -m json.tool at the end of the cURL command.

   The API command returns the addresses in the following format:

    {
      "result": [        
       {            
        "address_details": [
         {
           "address": "1.2.3.4"    
           "allow_listed": false
           "addressType": "address-type"
           "serviceType": "service-type"
            }
          ],
           "addresses": [
             "1.2.3.4"
           ]
           "zone": "zone-name",
         "zone_subnet": [zone-subnet
   ]
   },
     "status": "success"

   Where:

   • address_details shows the details of the address for each location.
     • serviceType shows the type of IP address (either remote network (remote_network), Prisma Access gateway (gp_gateway), Prisma Access portal (gp_portal), Clean Pipe (clean_pipe), or Remote Browser Isolation (rbi).
     • addressType specifies the type of address specified with the addrType keyword (either active or pre-allocated if you're preallocating IP addresses for mobile user locations).
     • address shows the IP address you need to add to your allow lists.
       If the API returns multiple IP addresses, Prisma Access summarizes the IP addresses in the addresses field.
   • addresses lists all the IP addresses for the location that you need to add to your allow lists.
   • zone is the Prisma Access location associated with the IP addresses.
   • zone_subnet is the subnet for mobile user gateways and portals. Prisma Access also provides this subnet if you're preallocating IP addresses for mobile user locations.

   If there are any problems with the options in the .txt file, the API returns an error similar to the following:

     {"status": "error","result": "Invalid json format in the request. trace_id: xxxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx "}

4. Update the allow lists on your on-premises servers or SaaS application policy rules with the IP addresses you retrieved.