Focus

Configure an on-premises or VM-Series Firewall as a Master Device

Table of Contents

Filter

Expand All | Collapse All

Prisma Access Docs

Administration
Version
- Prisma Access China
- 4.0 & Later
- 3.2 Preferred and Innovation
- 3.1 Preferred and Innovation
- 3.0 Preferred and Innovation
- 2.2 Preferred
Integrations
Incidents & Alerts
Release Notes
Version
- 5.2 Preferred and Innovation
- 5.1 Preferred and Innovation
- 5.0 Preferred and Innovation
- 4.2 Preferred
- 4.1 Preferred
- 4.0 Preferred
- 3.2 Preferred and Innovation
- 3.1 Preferred and Innovation
- 3.0 Preferred and Innovation
- 2.2 Preferred

Populate User Group Names in Security Policy Rules Using a Master Device

Use Long-Form DN Entries to Implement User- and Group-Based Policy

Configure an on-premises or VM-Series Firewall as a Master Device

Use the following procedure to configure an on-premises or VM-series firewall as a Master Device.

You can only use one Master Device per device group; if you need to configure a Master Device for different device groups, you need to create a separate Master Device for each device group.

Make sure that the device you want to use as a Master Device is managed by the same Panorama that manages Prisma Access.
You can check your managed devices under PanoramaManaged Devices.
Add the master device to your Prisma Access mobile user or remote network deployment.
- For a Mobile Users—GlobalProtect deployment, select PanoramaCloud ServicesConfigurationMobile Users—GlobalProtect, click the gear icon in the Settings, and select the on-premise firewall you want to specify as a Master Device.
  
  If you use the default Device Group Name (Mobile_User_Device_Group in this case) and Parent Device Group (Shared in this case), any devices that are not associated with another device group display in the drop-down choices. If you have associated the master device with another device group, select the Parent Device Group associated with that device group have it display in the drop-down.
- For a Mobile Users—Explicit Proxy deployment, select PanoramaCloud ServicesConfigurationMobile Users—Explicit Proxy, click the gear icon in the Settings, and select the Master Device you created.
- For remote network deployments, the device group with a remote network connection, select PanoramaCloud ServicesConfigurationRemote Networks, click the gear icon in the Settings, and select the Master Device you created.
Prisma Access automatically populates username-to-user group mapping for the device group that is associated with the master device only. For this example, the auto-population would occur only in the Remote_Network_Device_Group device group and would not populate to any other device groups.
Click OK.