Features in Prisma Access 3.0 Preferred and Innovation
Table of Contents
Expand All
|
Collapse All
Prisma Access Docs
-
-
- Prisma Access China
- 4.0 & Later
- 3.2 Preferred and Innovation
- 3.1 Preferred and Innovation
- 3.0 Preferred and Innovation
- 2.2 Preferred
-
-
-
- 5.2 Preferred and Innovation
- 5.1 Preferred and Innovation
- 5.0 Preferred and Innovation
- 4.2 Preferred
- 4.1 Preferred
- 4.0 Preferred
- 3.2 Preferred and Innovation
- 3.1 Preferred and Innovation
- 3.0 Preferred and Innovation
- 2.2 Preferred
Features in Prisma Access 3.0 Preferred and Innovation
This section lists the new features that are available
in Prisma Access 3.0, along with upgrade information and considerations
if you are upgrading from a previous Prisma Access version.
- Cloud Services Plugin 3.0
- Upgrade Considerations for 3.0 Prisma Access Releases
- Determine Your Prisma Access 3.0 Version
- Minimum Required Software Versions
- New Features—Prisma Access 3.0 Preferred
- New Features—Prisma Access 3.0 Innovation
Cloud Services Plugin 3.0
Prisma Access 3.0 uses a single plugin for both 3.0
Preferred or 3.0 Innovation. The version that the plugin activates
is dependent on the dataplane version of Prisma Access 3.0 you are
running.
- Cloud Services Plugin 3.0 Preferred runs on the PAN-OS version 10.0 dataplane, which is the same dataplane as that running on Prisma Access 2.2 Preferred.
- Cloud Services Plugin 3.0 Innovation runs on the PAN-OS 10.1 dataplane and unlocks the latest features available with the PAN-OS 10.1 dataplane, in addition to other new features.
Upgrade Considerations for 3.0 Prisma Access Releases
The following upgrade considerations apply to deployments
upgrading to 3.0 Innovation and Preferred:
- Upgrades to 3.0 Preferred:Prisma Access 2.2 Preferred is a prerequisite for Prisma Access 3.0 Preferred. If your deployment is on an earlier version of Prisma Access, you must first upgrade to Prisma Access 2.2 before you can upgrade to 3.0. Prisma Access will make the 3.0 plugin available to you after your deployment has been upgraded to 2.2 Preferred.Be sure that you have signed up for email alerts in the Prisma Access app. You will receive an email notification via Prisma Access Insights when the 3.0 plugin becomes available to you. Upgrades from 2.0 or 2.1 versions of Prisma Access are not supported.
- Upgrades to 3.0 Innovation:To upgrade to 3.0 Innovation, reach out to your Palo Alto Networks account representative and submit a request. The request will be reviewed internally and, if approved, your deployment will be upgraded to 3.0-Innovation. The upgrade to Prisma Access 3.0 Innovation requires a dataplane upgrade; after the dataplane is fully upgraded, the plugin will be made available to you.
Determine Your Prisma Access 3.0 Version
After you install or upgrade
the Cloud Services plugin, determine the Prisma Access 3.0
version your deployment is running (either Preferred or Innovation)
by selecting PanoramaCloud
ServicesConfigurationService
Setup and viewing the Current
Dataplane version in the DataPlane PAN-OS
version area.
- If the dataplane version is 10.0.x, you are running version 3.0 Preferred.If the dataplane version is 10.1.x, you are running version 3.0 Innovation.
Minimum Required Software Versions
For the minimum Panorama version that is supported with
Prisma Access 3.1, see Prisma Access and Panorama Version
Compatibility in the Palo Alto Networks Compatibility
Matrix.
If you have a Cloud Managed Prisma Access deployment, plugin
upgrades are not required; however, the GlobalProtect versions apply
to both Panorama and Cloud Managed versions of Prisma Access.
Prisma Access supports any GlobalProtect version that is not End-of-Life (EoL), including 5.1,
5.2, 5.3, and 6.0. A minimum of GlobalProtect 5.2.5 is required
for GlobalProtect App Log Collection
for Troubleshooting. The Autonomous DEM (ADEM) documentation has
the minimum GlobalProtect and Content Release versions required
for ADEM.
New Features—Prisma Access 3.0 Preferred
The following table describes the new features that
are available with Prisma Access 3.0 Preferred.
Feature | Description |
---|---|
QoS Support for Remote Networks | Prisma Access supports Quality of Service
(QoS) for remote networks that allocate bandwidth by compute
location. If you are using the bandwidth allocation per compute
location model, you can add QoS profiles to prioritize traffic per
site. If you have a deployment that allocates bandwidth by location
and uses QoS, do not migrate to a deployment that allocates bandwidth
by compute location; migrations with QoS are not supported. |
IP Allow Listing of Prisma Access Public IP Addresses from the Prisma Access UI | You can indicate whether or not you use
Prisma Access public IP addresses for IP allow listing. You can
retrieve the Prisma Access public IP addresses from Panorama (for Panorama
Managed Prisma Access deployment) or the Cloud Managed Prisma Access
UI (for Cloud Managed Prisma Access deployments) for allow listing
purposes. After you make a note of the IP addresses, you add them
to your organization's allow lists, then return to Panorama or the
Prisma Access UI and mark them as added. You can also note any IP
addresses that have not been added to your organization’s allow
lists. In this way, Prisma Access uses only the IP addresses you
have added to your allow lists in case of an autoscale event or infrastructure
upgrade. |
Google IdP Support for Cloud Identity Engine | To simplify the retrieval of user and group
information for deployments that use Google Identity for cloud identity services,
Prisma Access supports Google Identity integration with the Cloud
Identity Engine. |
Mobile User Regional Redundancy | To ensure that your mobile users always
have access to the services and applications that are accessible
from service connections, you can enable network redundancy during mobile
user setup. This feature provides redundant network paths between
the mobile user dataplane and service connections that may be in
different compute locations. Enabling redundancy provides
you with more resilient access to resources behind service connections
in a data center or headquarters location. Because a service connection
is required for mobile users to access resources from remote networks,
you also have more resiliency in accessing resources in remote network
locations. For either a Cloud Managed or Panorama Managed Prisma
Access deployment, the following prerequisites are required before
this feature is enabled:
|
Prisma SD-WAN CloudBlade Thin Client Integration with Cloud Services Plugin | For Prisma SD-WAN integrations
with Prisma Access, the Cloud Services plugin includes a built-in CloudBlade
thin client that eliminates the requirement to have a Docker container
host or Kubernetes environment to host a separate CloudBlade. This
integration enables easier onboarding of Prisma SD-WAN devices using
remote network connections. |
Maximum Size Increase for External Dynamic Lists | To allow you to use existing firewall security
policy rules and related objects with Prisma Access to implement
a consistent security posture across your network, Prisma Access increases
the maximum size for External Dynamic Lists (EDLs) to the following
maximums:
To
activate this feature on your service tenant, reach out to your
Palo Alto Networks account representative and submit a request. |
Protect from Web-Based Threats with RBI Using Proofpoint | To support a larger range of use cases and
prevent malware, phishing, cryptomining, and other threats, Prisma Access
has added Proofpoint as a technology partner to
implement Remote Browser Isolation (RBI) using URL response page redirect to
the RBI cloud. The RBI integration helps with isolating all active, untrusted
web content from endpoints that your users use to access business-critical
internet services and internal networks, and ensure that the corporate
network remains safe. |
WildFire India Cloud Support | To allow you to adhere to data sovereignty
and residency laws as well as established data protection and privacy regulations,
Prisma Access supports the use of the WildFire India Cloud (in.wildfire.paloaltonetworks.com).
The following locations map to the WildFire India Cloud:
|
WildFire API Support | You can extend the malware detection capabilities
of WildFire using the WildFire API. You can
use the WildFire API to query WildFire for verdicts, samples, and reports,
and to automate the submission of files and links to WildFire for
analysis. |
Explicit Proxy Enhancements | Prisma Access provides the following enhancements
for Explicit Proxy:
|
New Prisma Access Compute Locations | To optimize performance, reduce latency,
and adhere to data sovereignty rules, Prisma Access adds the following compute
locations, and the following locations map to these compute locations:
In addition, the existing Canada Central compute
location is renamed to Canada Central (Montreal).
The Canada East location continues to be mapped to this compute location. If
you add the locations after you install the Cloud Services 3.0 plugin,
Prisma Access associates the new compute locations automatically. For
Explicit Proxy, these new compute locations are supported for new
deployments only. If you are upgrading from an existing
Prisma Access deployment and you have already onboarded these locations, complete
the following steps to take advantage of the new compute location:
Since
you need to allow time to delete and add the existing location and
change your allow lists, Palo Alto Networks recommends that you
schedule a compute location change during a maintenance window or
during off-peak hours. |
EDL Custom Category End Token Support | If you use URLs in custom URL categories or external dynamic lists (EDLs) and
do not append a forward slash (/)
to the URL, it is possible to allow more URLs than you intended.
For example, entering example.com as a matching URL
instead of example.com/ would also match
example.com.website.info or example.com.br. Prisma Access
allows you to set an ending token to URLs in EDLs or custom URL
categories so that, if you enter example.com,
Prisma Access treats it as it would treat example.com/ and only
matches that URL. |
New Features—Prisma Access 3.0 Innovation
Version 3.0 Innovation includes all the all the features in 3.0 Preferred and adds
the following features.
Feature | Description |
---|---|
Support for PAN-OS 10.1 | Cloud Services 3.0 Innovation uses a dataplane
version of PAN-OS 10.1 and you are able to take advantage of PAN-OS 10.1
features up to PAN-OS 10.1, including the following features:
|
Explicit Proxy Enhancements | In addition to the Explicit Proxy enhancements
described for 3.0 Preferred,
Prisma Access offers the following additional enhancements for 3.0
Innovation:
|
SaaS Security Inline Enforcement | In addition to the SaaS Visibility feature that
was introduced with Prisma Access 2.2 Preferred, you can import SaaS policy recommendations from SaaS Security Inline to
gain control of the applications in the policy recommendation. |
Commit Error Reporting Improvements | When you receive configuration-related errors
during commits, Prisma Access has replaced generic messages you previously
received with messages that more clearly communicate the cause of
the misconfiguration. For example, authentication objects without
authentication profiles receive a message indicating the object
with the missing profile instead of a generic message indicating
an issue with the commit. Other message improvements include:
|