Onboard an ECMP Site
Table of Contents
Onboard an ECMP Site
4.0.0 PIC
ECMP is now enabled by default within the CloudBlade. With the Local-AS configuration
of the CloudBlade, the ECMP onboarding of sites is simplified by just having to
configure the prisma_access tag on a site, in conjunction
with the IPSec Termination Node region tags applied.
This provides the ability to add new links to the site and have them automatically be
added to the ECMP bundle, providing the site with an additional path to Prisma
Access.
ECMP is enabled on all circuits, but can be disabled or modified for a given site.
All circuits that have reachability to Prisma Access will automatically be added to
the ECMP bundle, with up to four interfaces in the ECMP bundle.
It is recommended to perform the Interface tagging with the
relevant IPSec Termination nodes, before applying the site level tag.
- From the Prisma SD-WAN web interface, select your site.
- Click the extended tags icon on the Edit Site screen to
view ECMP.
![]()
When you create an ECMP bundle, the default selection is Auto Detect for both Region and License level sections by default.With Aggregate Bandwidth licensing mode, the auto region detection for ECMP bundles is not recommended to be used. There is no current logic today from the CloudBlade and Prisma integration to determine if a region has bandwidth allocated (and IPSec Termination Nodes behind it). The current CloudBlade logic assumes that all regions have bandwidth available.![]()
