Use a Group in Stacked Policies
Table of Contents
Use a Group in Stacked Policies
Lets see how to use a group in stacked policies.
To use a group in Stacked Policies:
- In Strata Cloud Manager, go to .
- Select a Path Policy Set and within the policy set, select a rule to edit or add a new rule.
- Go to Apps and select the required
applications or confirm that the required applications are selected.
![]()
- On the Paths tab, select the Active and/or Backup path
as Standard VPN on <circuit category>
or Any Public / Private to allow the system
to use any/ all paths of that type.
![]()
You can mix Standard VPNs with other available paths – private, public, direct or VPNs. - On the Service & DC Group tab,
select Zscaler as the Standard VPN group,
and click Save & Exit.
![]()
- If Standard VPN path is used in a network policy, then you must have a Standard VPN Services and DC Group defined in the policy for the traffic to transit through that group. If not, traffic will be black-holed.
- If Required is selected, traffic will always transit through the Services and DC Group. If not selected, traffic may or may not transit through the Services and DC Group per policy.
