Assign a Static IP Address Using the Console
Table of Contents
Assign a Static IP Address Using the Console
Access the Prisma SD-WAN ION CLI commands through Console.
Access the Prisma SD-WAN ION device command-line
interface (CLI) using the console and assign a static IP address
to an unclaimed ION device controller or internet port.
Command-line interface (CLI) using the console and assigning a static
IP address is only required to establish initial communication with the controller.
Once a device is claimed, the controller will overwrite any further configuration
changes done locally on the ION via the console or device toolkit. This is supported
on all the Prisma SD-WAN ION Devices.
- Connect an RJ-45 to USB cable to the AUX port on the Prisma SD-WAN ION device.Connect the other end of the RJ-45 to USB cable to your computer and launch a terminal emulator.Set the terminal or baud rate to 115200/8/n/1 on the terminal window.The Login menu displays the login prompt with the ION device serial number.<ION-device-serial-number> login:Use the default user details username elem-admin/hackle628)bags for unclaimed devices.CloudGenix 5.1.0-b23 30-001189-8149 login: elem-admin Password: Last login: Tue Nov 20 22:09:02 UTC 2018 on ttyS0Configure the controller port or one of the internet ports with the appropriate IP address, gateway address, and DNS server.
- Assign a static IP address to the ION devices with controller ports using the config interface command.# config interface controller1 ip static address=10.0.0.126/24 gw=10.0.0.1 dns=8.8.8.8Verify your configuration using the dump interface config command.# dump interface config controller1 Interface : controller 1 Description: ID : 15403462741430053 Type : port Admin State : up Alarms : enabled MTU:1500 IP : static Address : 10.0.0.126/24 Route : 0.0.0.0/0 via 10.0.0.1 metric 1 DNS Server : 8.8.8.8 # dump interface status controller1 Interface: controller 1 Device : eth0 ID : 15403462741430053 MAC Address : ec:b9:07:00:12:3c State: up Last Change : 2018-11-20 21:55:40.785009014 +0000 UTC Duplex: full Speed : 1000Mbps Address : 10.0.0.126/24 Route : 0.0.0.0/0 via 10.0.0.1 metric 0 DNS Server : 8.8.8.8Use the config interface command to assign a static IP address to the internet port, this step is required for ION devices without controller ports.# config interface 1 ip static address=24.4.5.2/30 gw=24.4.5.1 dns=8.8.8.8Verify your configuration using the dump interface config command.Verify the connection to the controller using the dump controller status command.# dump controller status Controller Connection : Partially Connected Number of Active Connections : 2 ----------------------------------------------------------------- tcp 0 0 10.0.0.126:57966 52.8.4.127:443 ESTABLISHED tcp 0 0 10.0.0.126:57338 52.8.4.127:443 ESTABLISHED -----------------------------------------------------------------Go to the Prisma SD-WAN web interface to claim your recently configured ION device and assign it to a site.After you change the device to the claimed state, change the default password to match your configured password ().
