dump bypass-pair config
Focus
Focus

dump bypass-pair config

Table of Contents

dump bypass-pair config

Use the dump bypass-pair config command to display bypass-pair configuration details. Information displayed includes port names configured as part of a bypass-pair, status of LAN state propagation—whether enabled or not, Hardware Relay connection status, admin state, and use of the port for public or private networks.

Command

dump bypass-pair config

Options

None

Command Notes

RoleSuper, Read Only, Monitor
Related Commands
Introduced in Release 4.6.1

Example

dump bypass-pair config Bypass Pair : wan 1 & lan 1 Propagate Lan State : No Hardware Relay : Yes Admin State : up Used For : private_wan Attached Network : Network ID : 15132379689770097 Name : default_lahor_523862800 VLAN : 10 Scope : global IP address at Router: 192.168.5.10/24 Network ID : 15208455382440118 Name : default_lahore_97264634 VLAN : 110Scope : global IP address at Router: 192.168.110.10/24 Network ID : 15208455388040127 Name : default_lahore_623716095 VLAN : 220 Scope : global IP address at Router: 192.168.220.10/24 Bypass Pair : wan 3 & lan 3 Propagate Lan State : No Hardware Relay : Yes Admin State : up Used For : none Bypass Pair : wan 4 & lan 4 Propagate Lan State : No Hardware Relay : Yes Admin State : up Used For : public
dump bypass-pair config Bypass Pair : 1 & 3 Propagate Lan State : No Hardware Relay : No Used For : private-l2 Attached Network : Network ID : 1678787458499023596 Name : default_bangalore_567099648 VLAN : 0 Scope : global IP address at Router: 10.3.55.1/24 IPv6 address at Router: 2001:10:3:55::1/64 CircuitLabel : BangalorePvtSWI1