Prisma SD-WAN ION CLI Reference
    : inspect connection
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Prisma SD-WAN ION CLI Reference
    5. Use CLI Commands
    6. Inspect Commands
    7. inspect connection
    Download PDF

    Prisma SD-WAN ION CLI Reference

    inspect connection

    Table of Contents

    inspect connection

    Use the inspect connection command to inspect the established connections and to debug connections that match user-specified options. It displays the protocol, time after which connection times out, source IP, destination IP, source port, and destination port.

    Command

    inspect connection (all | srcv4=src-ipv4 | destv4=dst-ipv4 | ) | | srcport=src-port | dstport=dst-port | proto= ( udp | tcp | icmp | other ))

    Options

    srcv4Enter the source IP address.
    dstv4Enter the destination IP address.
    srcportEnter the source port.
    dstportEnter the destination port.
    protoTab to select UDP, TCP, or ICMP. Or, enter a protocol number ranging from 0 - 255.

    Command Notes

    RoleSuper, Read Only
    Related Commands—
    Introduced in Release 5.0.1

    Example

    inspect connection proto=udp
				       PROTO TIMEOUT SRC         DST              SPORT  DPORT  t-src       t-dst            tsport   tdport
				       udp    6      127.0.0.1   127.0.0.1        51884  53     127.0.0.1   127.0. 0.1        51884    53
				       udp    12     0.0.0.0     255.255.255.255  68     67     0.0.0.0     255.255.255.255   68       67
				       udp    29     10.24.18.20 210.24.18.101    51409  3784   10.24.18.20 210.24.18.101     51409    3784

    © 2024 Palo Alto Networks, Inc. All rights reserved.