How Often ADEM Runs Synthetic Tests
Focus
Focus
Autonomous DEM

How Often ADEM Runs Synthetic Tests

Table of Contents

How Often ADEM Runs Synthetic Tests

To monitor an application, ADEM runs the synthetic tests at frequent intervals.
Where Can I Use This?What Do I Need?
  • Prisma Access (Managed by Strata Cloud Manager)
  • Prisma Access (Managed by Panorama)
  • Strata Cloud Manager
  • Prisma Access license
  • Autonomous DEM license
The table below shows the interval between test runs and the frequency at which the test result is sent to the ADEM portal.
FromToTest TypeFrequency
Access Experience AgentLANICMP ping
Every 10 seconds.
The agent collects up to 30 measurements, when sending to the portal it separates these into 1 minute chunks and creates a min/max/avg for each value sampled) so a max of 5 samples will be sent to the portal. This is common for all ICMP tests.
Access Experience AgentPrisma Access GatewayICMP to ping private tunnel IP
Every 10 seconds.
The agent collects up to 30 measurements, when sending to the portal it separates these into 1 minute chunks and creates a min/max/avg for each value sampled) so a max of 5 samples will be sent to the portal. This is common for all ICMP tests.
Access Experience AgentPrisma Access GatewayICMP to ping gateway public IP
Every 10 seconds.
The agent collects up to 30 measurements, when sending to the portal it separates these into 1 minute chunks and creates a min/max/avg for each value sampled) so a max of 5 samples will be sent to the portal. This is common for all ICMP tests.
Access Experience AgentPrisma Access GatewayICMP to ping gateway public IP with incrementing TTLs to discover the hops along the path
Every 5 minutes.
Results sent to DEM portal every 5 mins, contains average delay, jitter and loss for each discovered hop in the path.
These path traces can be ICMP or TCP based. For the ICMP case the sampling comments above are not applicable.
Access Experience AgentAny IP or domainICMP ping
Every 10 seconds.
The agent collects up to 30 measurements, when sending to the portal it separates these into 1 minute chunks and creates a min/max/avg for each value sampled) so a max of 5 samples will be sent to the portal. This is common for all ICMP tests.
Access Experience AgentAny IP or domainICMP ping
Every 5 minutes.
The agent collects up to 30 measurements, when sending to the portal it separates these into 1 minute chunks and creates a min/max/avg for each value sampled) so a max of 5 samples will be sent to the portal. This is common for all ICMP tests.
Access Experience AgentAny IP or domainHTTP/S
Every 5 minutes.
Results sent to the DEM portal every 5 mins, and contains HTTP/S timing metrics.
Prisma AccessAny IP or domainICMP
Every 10 seconds.
Results sent to DEM portal every 5 mins, contains average delay, jitter and loss comprising up to 30 measurements.
Prisma AccessAny IP or domainICMP
Every 5 minutes.
Results sent to DEM portal every 5 mins, contains average delay, jitter and loss for each discovered hop in the path.
Prisma AccessAny IP or domainHTTP/S
Every 5 minutes.
Results sent to the DEM portal every 5 mins, and contains HTTP/S timing metrics.