Panorama Management Compatibility
Review the Panorama™ management server compatibility
based on the installed PAN-OS® version.
Review the table below to understand
which Palo Alto Networks Next-Generation Firewall, Dedicated Log
Collector, and WildFire® appliances a Panorama™ management server
can manage based on the installed PAN-OS version. Palo Alto Networks
recommends management of currently supported
Palo Alto Networks Next-Generation Firewalls, Dedicated
Log collector, and WildFire appliance running a supported PAN-OS
version.
Dedicated Log Collectors must be running the same or later PAN-OS version than managed
firewalls from which logs are forwarded. Palo Alto Networks does not support forwarding
logs from managed firewalls to a Dedicated Log Collector if the Dedicated Log Collector
is running an earlier PAN-OS version than that installed on your managed firewalls. This
may lead to log forwarding and ingestion issues.
Despite these onboarding requirements, Panorama supports managing firewalls, Dedicated Log
Collectors, and WildFire appliances running the PAN-OS versions described below.
Management of
End-of-Life (EoL) PAN-OS versions may
result in unexpected issues, particularly if there is a large gap between the PAN-OS
version installed on Panorama and the one installed on the firewall. For example,
you may run into unexpected or unknown issues if you attempt to manage a firewall
running the EoL PAN-OS 7.1 release from a Panorama management server running PAN-OS
10.2 or a later version.
Panorama Version | Managed Device Version |
11.2
|
11.2
11.1
11.0
10.2
10.1
9.1
|
11.1
|
11.1
11.0
10.2
10.1
9.1
|