FedRAMP
Time Range Filter
Table of Contents
Time Range Filter
The Time Range selection
filter appears at the top of all the ADEM dashboards except the Settings dashboard.
You can filter data to display in the dashboard based on the Time Range you
select.
The time is localized, so you can filter based
on the local time for your region. Data is fetched every minute,
but the number of datapoints shown in most histograms vary according
to the Time Range selected.
For your convenience, ADEM lets you pick the Time
Range from a few predefined ranges or configure your
own date and time range. Datapoints shown in most histograms vary
according to the Time Range selected:
| If the Time Range selected is... | Data point interval in histograms is shown for every... |
|---|---|
| <48 hours | 5 minutes |
| 48 hours - <7 days | 15 minutes |
| 7 days - <10 days | 30 minutes |
| 10 days - <30 days | 1 hour |
| >30 days | 3 hours |
| Custom | You can set a custom time interval (for example,
start at 5:00 pm on June 1 and end at 4:00 pm on June 2) in addition
to the pre-populated Time Range selections
available in the filter. To create a custom time range:
|