>
    Strata Copilot
    AIMS 2
    Focus
    Download PDF
    Focus
    1. Home
    2. Device Security
    3. Device Security Integration Guide
    4. Asset Management
    5. Integrate Device Security with AIMS
    6. Set up AIMS for Integration
    7. AIMS 2
    Download PDF
    Device Security

    AIMS 2

    Table of Contents

    AIMS 2

    Set up AIMS 2 for integration with Device Security through Cortex XSOAR.
    Set up an AIMS API configuration to define the maximum number of device records that AIMS will provide to Device Security and record the client ID that AIMS generates. You will use the client ID when configuring the AIMS integration instance in Cortex XSOAR.
    These instructions are based on AIMS version 2.6.11. Device Security supports all AIMS v2 builds.
    1. Log in to the AIMS system and click TransferAPI Configuration.
      The API Configuration dialog box appears.
    2. Configure the AIMS API settings.
      Enter the following and then click Add:
      Name: Enter a name for your API configuration.
      Type: API
      Record Limit: Set the maximum number of device records that AIMS will provide to Device Security, keeping in mind that there is one record per device. In the following screen capture, the maximum is 2500 records. If there are more than 2500 records in the AIMS inventory that you want to import, increase the maximum to accommodate them. You can increase this as high as 100,000.
    3. Record the client ID for use when configuring the AIMS integration instance in Cortex XSOAR and then click Close.

    © 2026 Palo Alto Networks, Inc. All rights reserved.