Focus

GlobalProtect Portal for LSVPN Prerequisite Tasks

Table of Contents

Before configuring the GlobalProtect portal, you must complete the following tasks:

Create Interfaces and Zones for the LSVPN on the interface where you will configure the portal.
Enable SSL Between GlobalProtect LSVPN Components by creating an SSL/TLS service profile for the portal server certificate, issuing gateway server certificates, and configuring the portal to issue server certificates for the GlobalProtect satellites.
Configure the Portal to Authenticate Satellites by defining the authentication profile that the portal will use to authenticate satellites if the serial number is not available.
Configure GlobalProtect Gateways for LSVPN.