PAN-OS 9.1.16 Addressed Issues
Table of Contents
Expand All
|
Collapse All
Next-Generation Firewall Docs
-
-
- Cloud Management of NGFWs
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0
- PAN-OS 11.1 & Later
- PAN-OS 9.1 (EoL)
-
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0
- PAN-OS 11.1 & Later
-
-
-
- Cloud Management and AIOps for NGFW
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0
- PAN-OS 11.1
- PAN-OS 11.2
- PAN-OS 8.1 (EoL)
- PAN-OS 9.0 (EoL)
- PAN-OS 9.1 (EoL)
End-of-Life (EoL)
PAN-OS 9.1.16 Addressed Issues
PAN-OS® 9.1.16 addressed issues.
Issue ID | Description |
---|---|
PAN-235168
|
Fixed an issue where disk space became full even after clearing old
logs and content images.
|
PAN-216656 | Fixed an issue where the firewall was unable to fully process the user list from a child group when the child group contained more than 1,500 users.
|
PAN-215911 | Fixed an issue that resulted in a race condition, which caused the configd process to stop responding.
|
PAN-215488 | Fixed an issue where an expired Trusted Root CA was used to sign the forward proxy leaf certificate during SSL Decryption.
|
PAN-211997 | Fixed an issue where large OSPF control packets were fragmented, which caused the neighborship to fail.
|
PAN-211602 | Fixed an issue where, when viewing a WildFire Analysis Report via the web interface, the detailed log view was not accessible if the browser window was resized.
|
PAN-209696 | Fixed an issue where link-local address communication for IPv6, BFD, and OSPFv3 neighbors was dropped when IP address spoofing check was enabled in a Zone Protection profile.
|
PAN-207740 | Fixed an issue that resulted in a race condition, which caused the configd process to stop responding.
|
PAN-205453 | Fixed an issue where running reports or queries under a user group caused the reportd process to stop responding.
|
PAN-203563 | Fixed an issue with Content and Threat Detection allocation storage space where performing a commit failed with a CUSTOM_UPDATE_BLOCK error message.
|
PAN-203402 | Fixed an intermittent issue where forward session installs were delayed, which resulted in latencies.
|
PAN-203147 | (Firewalls in FIPS-CC mode only) Fixed an issue where the firewall unexpectedly rebooted when downloading a new PAN-OS software image.
|
PAN-201910 | PAN-OS security profiles might consume a large amount of memory depending on the profile configuration and quantity. In some cases, this might reduce the number of supported security profiles below the stated maximum for a given platform.
|
PAN-201639 | Fixed an issue with Saas Application Usage reports where Applications with Risky Characteristics displayed only two applications per section.
|
PAN-199612 | Fixed a sync issue with firewalls in active/active HA configurations.
|
PAN-198871 | Fixed an issue when both URL and Advanced URL licenses were installed, the expiry date was not correctly checked.
|
PAN-198693 | Fixed an issue where decrypted SSH sessions were interrupted with a decryption error.
|
PAN-198038 | A CLI command was added to address an issue where long-lived sessions were aging out even when there was ongoing traffic.
|
PAN-197919 | Fixed an issue where, when path monitoring for a static route was configured with a new Ping Interval value, the value was not used as intended.
|
PAN-197847 | Fixed an issue where disabling the enc-algo-aes-128-gcm cipher did not work when using an SSL/TLS profile.
|
PAN-197729 | Fixed an issue where repeated configuration pushes from Panorama resulted in a management server memory leak.
|
PAN-197576 | Fixed an issue where commits pushed from Panorama caused a memory leak related to the mgmtsrvr process.
|
PAN-197219 | Fixed an issue where the following error message was not sent from multi-factor authentication
PingID and did not display in the browser: Your
company has enhanced its VPN authentication with PingID. Please
install the PingID app for iOS or Android, and use pairing
key:<key>. To connect, type
"ok".
|
PAN-195790 | Fixed an issue where syslog traffic that was sent from the management interface to the syslog server even when a destination IP address service route was configured.
|
PAN-195583 | Fixed an issue where, after renaming an object, configuration pushes from Panorama failed with the commit error object name is not an allowed keyword.
|
PAN-194175 | Fixed an issue on Panorama where a commit push to managed firewalls failed when objects were added as source address exclusions in a Security policy and Share Unused Address and Service Objects with Devices was unchecked.
|
PAN-193808 | Fixed a memory leak issue in the mgmtsrvr process that resulted in an OOM condition.
|
PAN-193763 | Fixed an issue on the firewall where the dataplane CPU spiked, which caused traffic to be affected during commits or content updates.
|
PAN-192681 | Fixed an issue where HIP database storage on the firewall reached full capacity due to the firewall not purging older HIP reports.
|
PAN-190950 | Fixed an issue where creating or modifying a GlobalProtect portal configuration failed in FIPS mode with the following error message: clientless-vpn enc-algo-rc4 unexpected here.
|
PAN-189518 | Fixed an issue where incoming DNS packets with looped compression pointers caused the dnsproxyd process to stop responding.
|
PAN-189379 | Fixed an issue where FQDN based Security policy rules did not match correctly.
|
PAN-187829 | Fixed an issue where the web_backend and httpd processes leaked descriptors, which caused activities that depended on the processes, such as logging in to the web interface, to fail.
|
PAN-187761 | Fixed an issue where, during HA failover, the newly passive firewall continued to pass traffic after the active firewall had already taken over.
|
PAN-184537 | Fixed an issue where GlobalProtect requested for passwords that contained non ASCII characters (ö) to be reentered when refreshing the connection.
|
PAN-183319 | Fixed an issue on Panorama where commits remained at 99% due to multiple firewalls sending out CSR singing requests every 10 minutes.
|
PAN-183297
|
Fixed an issue where, when the firewall received a large amount of
user information, the firewall was unable to output IP-address to
username mapping information via XML API.
|
PAN-183126 | Fixed an issue on Panorama where you were able to attempt to push a number of active schedules to the firewall that was greater than the firewall's maximum capacity.
|
PAN-182845 | Fixed an issue that caused devices to be removed from Panorama when one device was added by one user, but a Commit and Push operation was completed by a second user before the first user completed a Commit of the added device change.
|
PAN-181839 | Fixed an issue where Panorama Global Search reported No Matches found while still returning results for matching entries on large configurations.
|
PAN-181759 | (Firewalls in active/active HA configurations only) Fixed an issue where firewall configuration files were not synced.
|
PAN-181295 | Fixed an issue where clicking on a rule in the App Dependency tab after a commit or commit all did not display the rule correctly.
|
PAN-179624 | Fixed an issue where setting the password complexity to Require Password Change on First Login caused the user to be prompted with certificate authentication.
|
PAN-177942 | Fixed an issue where, when grouping HA peers, access domains that were configured using multi-vsys firewalls deselected devices or virtual systems that were in other configured access domains.
|
PAN-177054 | Fixed an issue where, when you disabled a NAT rule, the Destination Translation value none displayed in blue and was still able to be modified to a different value.
|
PAN-175176 | Fixed an issue in which CBC ciphers for TLS traffic to port 28443 on Panorama were enabled.
|
PAN-174680 | Fixed an issue where, when adding new configurations, Panorama didn't display a list of suggested template variables when typing in a relevant field.
|
PAN-173179 | Fixed an issue where the rem_addr field in Terminal Access Controller Access-Control System (TACACS+) authentication displayed the management or service route IP address of the firewall instead of the source IP address of the user.
|
PAN-161958 | Fixed an issue where the FQDN refresh timer was pushed from Panorama appliances on PAN-OS 9.0 and later releases to firewalls running a PAN-OS 8.1 release.
|
PAN-158511 | Fixed an issue where configurations loaded and committed to Panorama changed external dynamic list references on Security policy rules to NONE when Antivirus Protection was not installed.
|
PAN-143930 | Fixed an issue where a process (routed) restarted due to the number of BGP peers exceeding the supported configuration.
|
PAN-78762 | Fixed an issue where you were unable to reset a VPN tunnel via the firewall web interface (Network > IPSec Tunnels > Tunnel Info > Restart).
|