PAN-OS 9.1.9 Addressed Issues
Table of Contents
Expand All
|
Collapse All
Next-Generation Firewall Docs
-
-
- Cloud Management of NGFWs
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0
- PAN-OS 11.1 & Later
- PAN-OS 9.1 (EoL)
-
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0
- PAN-OS 11.1 & Later
-
-
-
- Cloud Management and AIOps for NGFW
- PAN-OS 10.0 (EoL)
- PAN-OS 10.1
- PAN-OS 10.2
- PAN-OS 11.0
- PAN-OS 11.1
- PAN-OS 11.2
- PAN-OS 8.1 (EoL)
- PAN-OS 9.0 (EoL)
- PAN-OS 9.1 (EoL)
End-of-Life (EoL)
PAN-OS 9.1.9 Addressed Issues
PAN-OS® 9.1.9 addressed issues.
Issue ID | Description |
---|---|
PAN-165194 | Fixed an issue where multiple messages were
exchanged between secondary and primary Data Plane Development Kit
(DPDK) processes, which caused a process (brdagent)
to stop responding. |
PAN-164564 | Fixed an issue where stats API attempted
to get stats from an unavailable port. |
PAN-163538 | Fixed an issue on multi-dataplane platforms
where traffic through Large Scale VPN (LSVPN) tunnels dropped with
the error message tunnel resolution failure. |
PAN-163164 | Fixed an issue where the GlobalProtect client
used IPv6 during gateway login but used IPv4 during IPsec tunnel
creation, which caused it to fallback to SSL. |
PAN-162746 | Fixed an issue where DNS over TCP caused
a process (dnsproxy) to run out of memory. |
PAN-161745 | Fixed an issue where the time-to-live (TTL)
value received from the DNS server reset to 0 on DNS secure TCP
transactions when anti-spyware profiles were used, which caused
DNS dynamic updates to fail. |
PAN-160782 | Fixed an issue where the routed process
stopped responding when the BGP peer sent AS_PATHs with more than
255 AS numbers in all of the segments combined. There can now be
a maximum of 255 AS numbers in an AS_PATH list for a prefix. |
PAN-160744 | Fixed an issue where the negative time difference
between the dataplane and the management plane during the client
certificate info check prevented the GlobalProtect client from connecting
to the GlobalProtect gateway with the following error message: Required client certificate not found. |
PAN-160455 | Certain invalid URL entries contained in
an External Dynamic List (EDL) cause a process (devsrvr)
to stop responding (CVE-2021-3048). |
PAN-160434 | Fixed an issue where firewalls stopped processing
Layer-3-tagged traffic after Panorama pushed VLAN sub-interface
configurations to the firewall with the commit_all operation. |
PAN-159944 | Fixed an issue where a process (dnsproxyd) stopped
responding due to an error in the DNS cache operation. |
PAN-159826 | Fixed an issue where SSL VPN leaked when
the default browser feature on GlobalProtect was not enabled. |
PAN-159135 | Fixed an issue where the firewall rejected
SAML Assertions, which caused user authentication failure when the Validate Identity
Provider Certificate was enabled in the SAML Server
Profile in vsys3 or above. |
PAN-158988 | Fixed an issue with HTTP Header Insertion
where the payload was truncated when processing a segmented TCP
stream and when the client retransmitted the packet with the same
sequence number that was previously received segmented. |
PAN-158844 | Adds additional debugging to be used in
identifying the malformed references causing process crashes during
FQDN refresh. |
PAN-158774 | Fixed an issue where random DNS queries
dropped with the counter ctd_dns_wait_pkt_drop when DNS
security was enabled. |
PAN-158723 | A fix was made to address an improper handling
of exception conditions in the PAN-OS dataplane that enabled an
unauthenticated network-based attacker to send specifically crafted
traffic through the firewall that caused the service to crash (CVE-2021-3053). |
PAN-158328 | Fixed an issue where the firewall stopped
populating the multicast FIB table with OIL entries for multicast
groups. |
PAN-158262 | A buffer overflow vulnerability in the Telnet-based
administrative management service included with PAN-OS software
allows remote attackers to execute arbitrary code. A fix was
made to address a buffer overflow vulnerability in the Telnet-based
administrative management service included with PAN-OS that allowed
a remote attacker to execute arbitrary code (CVE-2020-10188). |
PAN-158036 | Fixed an issue on the firewall where custom
application signatures based on PROPFIND http-method didn't trigger
if webdav application ID was blocked
by a Security policy. To utilize this fix, you must
install content version 8367-6513 or later. |
PAN-157735 | Fixed an issue where the new PA-7000100G
network processing card (NPC) took 25 minutes to start after rebooting
the PA-7080 chassis. |
PAN-157721 | Fixed an issue where the firewall dropped
GPRS tunneling protocol (GTPv2) Create Session Requests and Responses
that had IEs 201 and 202 with the error Abnormal GTPv2-C message with invalid IE. |
PAN-157346 | Fixed an issue where HIP custom checks for
plist failed when the HIP exclusion category were configured under
(Mobile User Template > Network > GlobalProtect > Portal<portal-config>
> Agent<agent-config> > HIP Data Collection). |
PAN-157271 | Fixed an issue where Panorama
> Cloud Services was visible to users with device group
and template admin roles even if the admin role was disabled. |
PAN-156896 | (VM-Series firewalls only) Fixed
an issue where the firewall frequently stopped responding with the
following log: CONFIG_UPDATE_INC : Incremental update to DP failed please try to commit force the latest config. |
PAN-156264 | Fixed an issue where the firewall displayed IP address Netmask and default
gateway as unknown on the web
interface as well as the CLI. |
PAN-156225 | (PA-3200 Series firewalls only)
Fixed an issue where the HA1-B port remained down after an upgrade
from PAN-OS 9.1.4 to later 9.1 releases and from PAN-OS 10.0.0 to
PAN-OS 10.0.4. |
PAN-155656 | Fixed an issue where multicast RTP traffic
triggered unicast RTP Control Protocol (RTCP), and the predict session
failed to install, which blocked the parent RTP session from forwarding
packets. |
PAN-155147 | (VM-Series firewalls on Microsoft Azure
that use accelerated networking interfaces with DPDK mode)
Fixed an issue where hot plug notifications caused traffic disruption. |
PAN-154557 | Fixed an issue that caused a process (useridd) core
dump when parsing the Subject Alternative Name from a client certificate
sent in the HIP report. |
PAN-154403 | Fixed an issue with HIP matching logic for
missing patches where previous behavior indicated missing patches
when no patches were missing. |
PAN-154376 | Fixed an issue where a process (mgmtsrvr) stopped
responding and was inaccessible through SSH or HTTPS until the firewall
was power cycled. |
PAN-154195 | Fixed an issue where the firewall dropped
VoIP traffic over IPSec with counters flow_predict_convert_rtp_drop and flow_predict_convert_failed. |
PAN-153316 | CLI commands were added to address an issue
where virtual memory on a process (configd) exceeded
the new 32G limit.
|
PAN-153286 | Fixed an issue on Panorama deployed on Amazon
Web Services (AWS) where the Log Collector disk was on Admin disabled
state when changing the instance type from m4 to m5. |
PAN-153213 | Fixed a rare issue where TCP packets randomly
dropped due to reassembly failure. |
PAN-152497 | Fixed an issue where the firewall was unable
to create a new GTP-U session when it received Create Session Response
messages, which caused the following error message to display in
the GTP log: GTPv1 message failed stateful inspection. |
PAN-152458 | (VM-Series firewalls on Microsoft Hyper-V
only) Fixed an issue where, when upgrading to PAN-OS 9.0.8
or later, ethernet packets dropped after adding VLAN tags during
egress from a subinterface. To leverage this fix, set the interface
level maximum transmission unit (MTU) to 1496 or less. |
PAN-152003 | Fixed an issue where an email client was
unable to open an attached file due to removal of part of the file
name encoded in UTF-8 by the firewall CTD function for SMTP and
NAT sessions. |
PAN-151395 | Fixed an issue where the firewall repeatedly
logged connection failures to a configured Log Collector. |
PAN-150298 | Fixed an issue where Android clients matched
HIP objects configured for Apple products. |
PAN-150097 | Fixed an issue where hourly URL summary
log generation failed. |
PAN-150023 | A fix was made to address an improper authentication vulnerability
in PAN-OS that enabled a SAML authenticated attacker to impersonate
any other user in the GlobalProtect portal and GlobalProtect gateway
when they were configured to use SAML authentication (CVE-2021-3046). |
PAN-149501 | A fix was made to address a memory corruption
vulnerability in the GlobalProtect Clientless VPN that enabled an
authenticated attacker to execute arbitrary code with root user
privileges during SAML authentication (CVE-2021-3056). |
PAN-147792 | Fixed an issue where a process (configd) stopped
responding due to a buffer overflow. |
PAN-147783 | Checks were added to help prevent the dataplane
from restarting. |
PAN-144538 | Fixed an issue where locally disabling the
rule hit-count feature on Panorama caused a memory leak. |
PAN-144470 | Fixed an issue where driver descriptor rings
were out of sync in the control plane to dataplane direction, which
caused internal path monitoring heartbeat failures. |
PAN-142818 | Fixed an issue where the management server
restarted due to a telemetry buffer overflow that occurred when
generated threat logs had specific signature flags set. |
PAN-142621 | Fixed an issue where the firewall was unable
to log debug information in case of kernel panic. |
PAN-142473 | Fixed an issue where a commit failed with
the following error message: Disk quotas add up to more than 100%. Invalid configuration. due
to an integration issue. |
PAN-136347 | Fixed an issue wherer DNS proxy TCP connections
were processed incorrectly, which caused a process (dnsproxy)
to stop responding. |
PAN-134799 | Fixed an issue where packets of the same
session were forwarded through a different member of an Aggregate
Ethernet (AE) group once the session was offloaded. |
PAN-120423 | Support was added for XML API for GlobalProtect
logs. |
PAN-113795 | Fixed an issue on a firewall configured
with GlobalProtect Clientless VPN where a process (all_pkts)
stopped responding, which caused the dataplane to restart. |
PAN-110429 | Fixed an issue with firewalls in a high
availability configuration where multiple all_pktproc processes
stopped responding due to missing heartbeats, which caused service outages. |