Panorama Administrator's Guide
    : Add a ZTP Firewall to Panorama
    Focus
    Download PDF
    Focus
    1. Home
    2. Panorama
    3. Panorama Administrator's Guide
    4. Manage Firewalls
    5. Set Up Zero Touch Provisioning
    6. Add a ZTP Firewall to Panorama
    Download PDF

    Panorama Administrator's Guide

    Add a ZTP Firewall to Panorama

    Table of Contents

    Add a ZTP Firewall to Panorama

    Add a ZTP firewall to be managed by the Panorama management server.
    Log in to the web interface of the Panorama™ management server as a Superuser, Panorama admin, or as the ZTP installer admin to add a ZTP firewall to Panorama. To add the ZTP firewall, you must enter the firewall serial number and claim key provided by Palo Alto Networks and then register the firewall with the ZTP service. Registering the firewall claims the firewall as an asset in your account in the Customer Support Portal and allows the ZTP service to associate the firewall with the Panorama.
    1. Log in to the Panorama Web Interface.
    2. Add a ZTP firewall to Panorama.
      1. Select Firewall Registration and Add a new ZTP firewall.
      2. Enter the Serial Number of the ZTP firewall.
      3. Enter the Claim Key for the ZTP firewall provided by Palo Alto Networks.
        The eight digit numeric claim key is printed on a physical label attached to the back of the ZTP firewall you received from Palo Alto Networks.
      4. Click OK to save your configuration changes.
    3. Register the ZTP firewall.
      1. Select the newly added ZTP firewall and Register the firewall.
      2. When prompted, click Yes to confirm registering the ZTP firewall.
    4. Verify the firewall successfully registered with the ZTP service.
      1. Select Registration Status and verify that the ZTP firewall successfully registered with the ZTP service.
      2. Log in to the Panorama Web Interface using admin credentials.
      3. Select PanoramaManaged DevicesSummary and verify that the ZTP firewall is successfully added as a managed firewall.
        Ensure that the To SW Version column is configured to the correct PAN-OS version so that the firewall does not upgrade or downgrade unintentionally. ZTP functionality is supported only for PAN-OS 9.1.3 and later releases. Additionally, the PAN-OS version must be the same or an earlier version of the PAN-OS version running on Panorama.
        For more information, see Upgrade a ZTP Firewall.
    5. Add the ZTP firewall to device group and template stack.
      You must add the ZTP firewall to a device group and template stack to push policy and network configurations.
      1. Log in to the Panorama Web Interface using admin credentials.
      2. Select PanoramaDevice Groups, add a device group, and the ZTP firewall to the device group.
      3. Select PanoramaTemplates, configure a template stack, and the ZTP firewall to the template stack.

    © 2024 Palo Alto Networks, Inc. All rights reserved.