>
    clear connection
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Use CLI Commands
    5. Clear Commands
    6. clear connection
    Download PDF

    clear connection

    Table of Contents

    clear connection

    Use the clear connection command to clear the established connections that match user-specified options.

    Command

    clear connection (all | srcv4=src-ipv4 | destv4=dst-ipv4 | ) | | srcport=src-port |dstport=dst-port | proto= ( udp | tcp | icmp | other )

    Options

    srcv4Enter the source IP address to clear the established connections that match the specified source IP address.
    dstv4Enter the destination IP address to clear the established connections that match the specified destination IP address.
    srcportEnter the source port to clear the established connections that match the specified source port.
    dstportEnter the destination port to clear the established connections that match the specified destination port.
    protTab to select UDP, TCP, or ICMP. Or, enter a protocol number ranging from 0 - 255.

    Command Notes

    RoleSuper
    Related Commands—
    Introduced inRelease 5.0.1

    Example

    clear connection proto=udp
				This will be Service impacting for the matching connections areyou sure? [Y|N]:Y
				PROTO TIME OUT   SRC          DST      SPORT    DPORT   t-src       t-dst      tsport   tdport
				udp   29        10.24.18.209  8.8.8.8  38382    53     10.24.18.209  8.8.8.8    38382     53
				udp   29        10.24.18.202  8.8.8.8  37516    53     10.24.18.202  8.8.8.8    37516      53

    © 2024 Palo Alto Networks, Inc. All rights reserved.