: Replace the Virtual Disk on vCloud Air
Focus
Focus

Replace the Virtual Disk on vCloud Air

Table of Contents

Replace the Virtual Disk on vCloud Air

You cannot resize a virtual disk after adding it to the Panorama virtual appliance running on VMware vCloud Air. Because the Panorama virtual appliance in Legacy mode allows only one log storage location, you must replace the virtual disk as follows to modify the log storage capacity. In Panorama mode, you can simply Add a Virtual Disk to Panorama on vCloud Air (up to the maximum of 12).
On the Panorama virtual appliance in Legacy mode, you will lose the logs on the existing disk when you replace it. For the options to preserve existing logs, see Preserve Existing Logs When Adding Storage on Panorama Virtual Appliance in Legacy Mode.
  1. Remove the old virtual disk.
    1. Access the vCloud Air web console and select your Virtual Private Cloud OnDemand region.
    2. Select the Panorama virtual appliance in the Virtual Machines tab.
    3. Select ActionsEdit Resources.
    4. Click x for the virtual disk you are removing.
  2. Add the new virtual disk.
    1. Add another disk.
    2. Set the Storage to up to 8TB and set the storage tier to Standard or SSD-Accelerated.
    3. Save your changes.
  3. Reboot Panorama.
    1. Log in to the Panorama virtual appliance.
    2. Select PanoramaSetupOperations and Reboot Panorama.
  4. Verify that the modified log storage capacity is correct.
    1. Log in to the Panorama virtual appliance after it reboots.
    2. Select PanoramaSetupManagement and verify that the Logging and Reporting Settings section, Log Storage field, displays the modified log storage capacity accurately.