Addressed Issues in VM-Series Plugin 1.0.7
Table of Contents
Expand all | Collapse all
-
-
-
-
- Features Introduced in Zero Touch Provisioning 2.0
- Known Issues in the Zero Touch Provisioning 2.0.4 Release
- Known Issues in the Zero Touch Provisioning 2.0.3 Release
- Known Issues in the Zero Touch Provisioning 2.0.2 Release
- Known Issues in the Zero Touch Provisioning 2.0.1 Release
- Known Issues in the Zero Touch Provisioning 2.0.0 Release
- Limitations
-
-
Addressed Issues in VM-Series Plugin 1.0.7
The following list describes issues addressed
in the VM-Series plugin 1.0.7.
PLUG-2637
PLUG-2637—Data Plane Packet Buffer Utilization and GlobalProtect
Gateway Utilization values was floored to 0 in case the value was
between 0-0.9%.
(This issue is fixed in VM-Series plugin 1.0.7) With
this fix, the percentage values for custom metrics are not rounded
off.
PLUG-2763
PLUG-2763—On upgrading the VM-Series firewall on ESXi
on reboot if you have more than two dataplane interfaces (vNICs),
the firewall resets to using only two dataplane interfaces.
(This issue is fixed in VM-Series plugin 1.0.7) With
this fix, on reboot the dataplanes interface configuration is retained.