: Add a Virtual Disk to Panorama on Oracle Cloud Infrastructure (OCI)
Focus
Focus

Add a Virtual Disk to Panorama on Oracle Cloud Infrastructure (OCI)

Table of Contents

Add a Virtual Disk to Panorama on Oracle Cloud Infrastructure (OCI)

Add a virtual disk to expand log storage for the Panorama™ virtual appliance on Oracle Cloud Infrastructure (OCI).
After you Install Panorama on Oracle Cloud Infrastructure (OCI), add additional virtual logging disks to expand log storage capacity on the Panorama™ virtual appliance for logs generated by managed firewalls. You can add virtual disks to a local Log Collector for a Panorama virtual appliance in Panorama mode or for a Dedicated Log Collector. To add virtual disks, you must have access to the OCI console, the Panorama command-line interface (CLI), and the Panorama web interface.
The Panorama virtual appliance on OCI supports only 2TB logging disks and, in total, supports up to 24TB of log storage. You cannot add a logging disk smaller than 2TB or a logging disk of a size that is not evenly divisible by 2TB because the Panorama virtual appliance partitions logging disks in to 2TB partitions. For example, if you attach a 4TB logging disk, Panorama will create two 2TB partitions. However, you cannot add a 5TB logging disk because the leftover 1TB is not supported as a partition.
  1. Log in to the Oracle Cloud Infrastructure console.
  2. Create a 2TB block volume.
    1. Select Block StorageBlock Volumes and Create Block Volume.
    2. Enter a descriptive Name for the volume.
    3. Select the same Availability Domain as the Panorama virtual appliance instance.
    4. Select the Custom volume size.
    5. For the Volume Size, enter 2000.
    6. Create Block Volume.
  3. Attach a virtual logging disk to the Panorama virtual appliance instance.
    In all modes, the first logging disk on the Panorama VM must be at least 2TB in order to add additional disks. If the first logging disk is smaller than 2TB, you will be unable to add additional disk space.
    1. Select ComputeInstances and click the name of the Panorama virtual appliance instance.
    2. Under resources, select Attached Block Volumes and Attach Block Volume.
    3. For the Volume, Select volume and select the virtual logging disk.
    4. For the Attachment type, select Paravirtualized.
      This is required for the Panorama virtual appliance to recognize the virtual logging disk.
    5. For the Access, select Read/Write.
    6. Attach the virtual logging disk.
  4. Configure each disk.
    The following example uses the sdc virtual disk.
    1. Enter the following command to view the disks on the Panorama virtual appliance:
      show system disk details
      The user will see the following response:
      		Name : sdb 
      	State : Present 
      	Size : 2048000 MB 
      	Status : Unavailable 
      	Reason : Admin disabled
    2. Enter the following command and confirm the request when prompted for all disks with the Reason : Admin disabled response:
      request system disk add sdc
      The request system disk add command is not available on a Panorama management server in Management Only mode because logging is not supported in this mode. If you do not see the command, Set up a Panorama Virtual Appliance in Panorama Mode to enable the logging disks. Once in Panorama mode, Log in to the Panorama CLI and continue to the next step to verify the disk addition.
    3. Enter the show system disk details command to verify the status of the disk addition. Continue to the next step when all newly added disk responses display Reason : Admin enabled.
  5. Make disks available for logging.
    1. Log in to the Panorama web interface.
    2. Edit a Log Collector (PanoramaManaged Collectors).
    3. Select Disks and Add each newly added disk.
    4. Click OK.
    5. Select CommitCommit to Panorama.
      For Panorama in an Active/Passive high availability (HA) configuration, wait for HA sync to complete before continuing.
    6. Select CommitPush to Devices and push the changes to the Collector Group the Log Collector belongs to.
  6. (New Panorama deployments in Panorama mode only) Configure Panorama to receive logs.
    If you are adding logging disks to an existing Panorama virtual appliance, skip to step 6.
  7. Verify that the Panorama Log Storage capacity is increased.
    1. Log in to the Panorama web interface.
    2. Select the Collector Group to which the Panorama virtual appliance belongs (PanoramaCollector Groups).
    3. Verify that the Log Storage capacity accurately displays the disk capacity.