Known Issues in Panorama Plugin for VMware NSX 4.0.3
Table of Contents
Expand all | Collapse all
-
-
-
-
- Features Introduced in Zero Touch Provisioning 2.0
- Known Issues in the Zero Touch Provisioning 2.0.4 Release
- Known Issues in the Zero Touch Provisioning 2.0.3 Release
- Known Issues in the Zero Touch Provisioning 2.0.2 Release
- Known Issues in the Zero Touch Provisioning 2.0.1 Release
- Known Issues in the Zero Touch Provisioning 2.0.0 Release
- Limitations
-
-
Known Issues in Panorama Plugin for VMware NSX 4.0.3
The following list describes known issues in the Panorama plugin for VMware NSX
4.0.3.
PLUG-10766
When downgrading from Panorama plugin
for VMware NSX 4.0.0 or 4.0.1 to 3.2.3 on an operation-centric deployment
running Panorama 10.1.x, new dynamic address group changes are not
seen on Panorama.
Workaround: Downgrade to Panorama plugin for VMware NSX
3.2.4.
PLUG-10652
When upgrading to or downgrading from
Panorama plugin for VMware NSX 3.2.4 or 4.0.1, dynamic objects are
not automatically synchronized.
Workaround: After upgrading or downgrading, select PanoramaVMwareNSX-TService Managers and click Synchronize Dynamic
Objects.
PLUG-8532
The Panorama user interface might time
out when generating a large amount of steering rules.
Workaround: You can optimize the generation of steering
rules by defining the steering rules in Panorama as post security
rules.
PLUG-8503
If you delete steering rules from NSX-T
manager, the service definition goes out of sync because the rules
are still present on Panorama. If you delete the steering rules
from Panorama and then recreate them, the service definition remains
out of sync.
Workaround: Perform a commit to Panorama after deleting
the steering rules but before recreating them. Perform another commit after
recreating the steering rules.
PLUG-7872
An NSX-T Service Definition does not
go out-of-sync, as it should, when a steering rule is moved up or
down in NSX-T. After performing a config sync, the steering rules
move back to their original positions.
PLUG-7560
Fixed in Panorama plugin for VMware NSX 5.0.2.
VM-Series firewalls deployed on NSX-T
remain listed on the secondary Panorama after being deleted, deactivated,
and removed from the primary Panorama.
PLUG-7030
In the Panorama CLI, there is a specific
order of expression arguments that must be followed when defining
NSX-T security-centric membership criteria. If you do not follow
this order, Panorama returns an error.
Workaround: Use this following order when defining membership
criteria through the Panorama CLI.
set plugins vmware_nsx nsx_t membership-criteria SDEF1 dynamic-address-groups DAG1 criteria C1 rule R1 member-type VirtualMachine key Tag operator CONTAINS value ubuntu scope os
Or without scope
set plugins vmware_nsx nsx_t membership-criteria SDEF1 dynamic-address-groups DAG1 criteria C1 rule R1 member-type VirtualMachine key Tag operator CONTAINS value ubuntu