: Replace an M-200 or M-600 Appliance Power Supply
Focus
Focus

Replace an M-200 or M-600 Appliance Power Supply

Table of Contents

Replace an M-200 or M-600 Appliance Power Supply

Learn how to replace a power supply on an M-200 or M-600 appliance.
M-200 and M-600 appliances have two AC power supplies (the second power supply is for redundancy). If one power supply fails, you can replace it without service interruption as described in the following procedure.
  1. Identify the failed power supply by viewing the power supply LED on the back of the appliance; when there is a failure, the LED turns solid yellow or turns off. The front panel system information LED also blinks red.
  2. Disconnect the power cord from the failed power supply.
  3. Grasp the handle on the failed power supply and simultaneously press the release lever to the left and then pull the power supply outward to remove it.
  4. Remove the replacement power supply from the packaging and slide it in to the empty power supply slot. Push the power supply all the way in until the release lever clicks and secures the power supply.
  5. Connect the AC power cord to the power supply input. The power supply LED turns green and the front system information LED stops blinking red.