Connect AC Power to an M-300 or M-700 Appliance
Table of Contents
Connect AC Power to an M-300 or M-700 Appliance
Learn how to connect AC power to an M-300 or M-700 appliance.
The following procedure describes how to connect
AC power to an M-300 or M-700 appliance.
To
avoid injury to yourself or damage to your Palo Alto Networks® hardware
or the data that resides on the hardware, read the Product Safety Warnings.
- Plug two AC power cables (provided) in to grounded
wall outlets.Connect the second power cord through a different circuit breaker to provide power redundancy and to allow for electrical circuit maintenance.
- Insert one power cord in to each of the two power supplies
on the back of the appliance.
![]()
- Press the power button on the front of the appliance.If only one power supply is connected, a warning beep will sound.
