Upgrading a PA-7000 Series Firewall with a first
generation switch management card (PA-7050-SMC or PA-7080-SMC) | PAN-OS 8.0 and later | Before upgrading the firewall, run the following
CLI command to check the flash drive’s status: debug system disk-smart-info disk-1. If
the value for attribute ID #232, Available_Reservd_Space 0x0000,
is greater than 20, then proceed with the upgrade. If the value
is less than 20, then contact support for assistance. | Before downgrading the firewall, run the
following CLI command to check the flash drive’s status: debug system disk-smart-info disk-1. If
the value for attribute ID #232, Available_Reservd_Space 0x0000,
is greater than 20, then proceed with the downgrade. If the value
is less than 20, then contact support for assistance. |