Replace a PA-1400 Series Power Supply
Table of Contents
Replace a PA-1400 Series Power Supply
Learn how to replace an AC or DC power supply on a PA-1400 Series firewall.
The following procedure describes how to replace
a PA-1400 Series power supply.
To avoid
injury to yourself or damage to your Palo Alto Networks® hardware
or the data that resides on the hardware, read the Product Safety Warnings.
- Identify the failed power supply by viewing the System logs or by viewing the power supply status LEDs described in Interpret the PA-1400 Series Status LEDs.
- Remove the cord retainer that secures the power cord
to the failed power supply and disconnect the power cord from the
firewall.
![]()
- Grasp the handle on the failed power supply and then
simultaneously press the release lever to the left and pull the
power supply outward to remove it.
![]()
- Remove the replacement power supply from the packaging and slide it into the empty power supply slot. Push the power supply all the way in until the release lever clicks and secures the power supply.
- Connect the power cable(s) to the power supply input and secure it to the power supply using the cord retainer. Once the power supply powers on, the input and output LEDs on the power supply turn green. Similarly, the PWR LED and the power supply LED (PWR 1 or PWR 2) on the front of the firewall turn green.
