Install the PA-1400 Series Firewall Using the Four-Post Rack Kit
Table of Contents
Install the PA-1400 Series Firewall Using the Four-Post Rack Kit
Learn how to install a PA-1400 Series firewall in a four-post rack.
The following procedure describes how to install the PA-1400 Series firewall in a 19” four-post
equipment rack using the four-post rack kit (PAN-1RU-RACK-KIT-4POST).
- Attach one rack-mount bracket to each side of
the firewall in the front-mount position using four #6-32 x 5/16”
screws for each bracket and torque to 9 in-lbs.
![]()
- Attach one rack-mount rail to each side of the firewall
using two #6-32 x 5/16” screws for each rail and torque to 9 in-lbs.
![]()
- With help from another person, hold the firewall in the
rack and secure the front rack-mount brackets to the front rack-posts
using two screws for each bracket. Use the appropriate screws (#10-32
x 3/4” or #12-24 x 1/2”) for your rack and torque to 25 in-lbs.
Use cage nuts to secure the screws if the rack has square holes.
![]()
- Slide one back rack-mount bracket into each of the two
previously installed side rack-mount rails and secure the brackets
to the back rack-posts using the appropriate screws for your rack
(#10-32 x 3/4” or #12-24 x 1/2”) and torque to 25 in-lbs.
![]()
