Focus

PAN-OS Web Interface Help

Application Override Source Tab

Table of Contents

Application Override Source Tab

Select the Source tab to define the source zone or source address that defines the incoming source traffic to which the application override policy will be applied.

Field	Description
Source Zone	Add source zones (default is any). Zones must be of the same type (Layer 2, Layer 3, or virtual wire). To define new zones, refer to Network > Zones. Multiple zones can be used to simplify management. For example, if you have three different internal zones (Marketing, Sales, and Public Relations) that are all directed to the untrusted destination zone, you can create one rule that covers all cases.
Source Address	Add source addresses, address groups, or regions (default is any). Select from the drop-down, or click Address, Address Group, or Regions at the bottom of the drop-down, and specify the settings. Select Negate to choose any address except the configured ones.

Field

Description

Source Zone

Add source zones (default is any). Zones must be of the same type (Layer 2, Layer 3, or virtual wire). To define new zones, refer to Network > Zones.

Multiple zones can be used to simplify management. For example, if you have three different internal zones (Marketing, Sales, and Public Relations) that are all directed to the untrusted destination zone, you can create one rule that covers all cases.

Source Address

Add source addresses, address groups, or regions (default is any). Select from the drop-down, or click Address, Address Group, or Regions at the bottom of the drop-down, and specify the settings.

Select Negate to choose any address except the configured ones.

Application Override General Tab

Application Override Destination Tab