Configure a Custom Certificate for a Panorama Managed WildFire Appliance
Table of Contents
10.0 (EoL)
Expand all | Collapse all
-
- Determine Panorama Log Storage Requirements
-
- Setup Prerequisites for the Panorama Virtual Appliance
- Perform Initial Configuration of the Panorama Virtual Appliance
- Set Up The Panorama Virtual Appliance as a Log Collector
- Set Up the Panorama Virtual Appliance with Local Log Collector
- Set up a Panorama Virtual Appliance in Panorama Mode
- Set up a Panorama Virtual Appliance in Management Only Mode
-
- Preserve Existing Logs When Adding Storage on Panorama Virtual Appliance in Legacy Mode
- Add a Virtual Disk to Panorama on an ESXi Server
- Add a Virtual Disk to Panorama on vCloud Air
- Add a Virtual Disk to Panorama on Alibaba Cloud
- Add a Virtual Disk to Panorama on AWS
- Add a Virtual Disk to Panorama on Azure
- Add a Virtual Disk to Panorama on Google Cloud Platform
- Add a Virtual Disk to Panorama on Hyper-V
- Add a Virtual Disk to Panorama on KVM
- Add a Virtual Disk to Panorama on Oracle Cloud Infrastructure (OCI)
- Mount the Panorama ESXi Server to an NFS Datastore
-
- Increase CPUs and Memory for Panorama on an ESXi Server
- Increase CPUs and Memory for Panorama on vCloud Air
- Increase CPUs and Memory for Panorama on Alibaba Cloud
- Increase CPUs and Memory for Panorama on AWS
- Increase CPUs and Memory for Panorama on Azure
- Increase CPUs and Memory for Panorama on Google Cloud Platform
- Increase CPUs and Memory for Panorama on Hyper-V
- Increase CPUs and Memory for Panorama on KVM
- Increase CPUs and Memory for Panorama on Oracle Cloud Infrastructure (OCI)
- Complete the Panorama Virtual Appliance Setup
-
- Convert Your Evaluation Panorama to a Production Panorama with Local Log Collector
- Convert Your Evaluation Panorama to a Production Panorama without Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing with Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing without Local Log Collector
- Convert Your Production Panorama to an ELA Panorama
-
- Register Panorama
- Activate a Panorama Support License
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is Internet-connected
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is not Internet-connected
- Activate/Retrieve a Firewall Management License on the M-Series Appliance
- Install the Panorama Device Certificate
-
- Panorama, Log Collector, Firewall, and WildFire Version Compatibility
- Install Updates for Panorama in an HA Configuration
- Install Updates for Panorama with an Internet Connection
- Install Updates for Panorama When Not Internet-Connected
- Install Updates Automatically for Panorama without an Internet Connection
- Migrate Panorama Logs to the New Log Format
-
- Migrate from a Panorama Virtual Appliance to an M-Series Appliance
- Migrate a Panorama Virtual Appliance to a Different Hypervisor
- Migrate from an M-Series Appliance to a Panorama Virtual Appliance
- Migrate from an M-100 Appliance to an M-500 Appliance
- Migrate from an M-100 or M-500 Appliance to an M-200 or M-600 Appliance
-
- Configure an Admin Role Profile
- Configure an Access Domain
-
- Configure a Panorama Administrator Account
- Configure Local or External Authentication for Panorama Administrators
- Configure a Panorama Administrator with Certificate-Based Authentication for the Web Interface
- Configure an Administrator with SSH Key-Based Authentication for the CLI
- Configure RADIUS Authentication for Panorama Administrators
- Configure TACACS+ Authentication for Panorama Administrators
- Configure SAML Authentication for Panorama Administrators
-
- Add a Firewall as a Managed Device
-
- Add a Device Group
- Create a Device Group Hierarchy
- Create Objects for Use in Shared or Device Group Policy
- Revert to Inherited Object Values
- Manage Unused Shared Objects
- Manage Precedence of Inherited Objects
- Move or Clone a Policy Rule or Object to a Different Device Group
- Push a Policy Rule to a Subset of Firewalls
- Manage the Rule Hierarchy
- Manage the Master Key from Panorama
- Redistribute Data to Managed Firewalls
-
- Add Standalone WildFire Appliances to Manage with Panorama
- Remove a WildFire Appliance from Panorama Management
-
-
- Configure a Cluster and Add Nodes on Panorama
- Configure General Cluster Settings on Panorama
- Remove a Cluster from Panorama Management
- Configure Appliance-to-Appliance Encryption Using Predefined Certificates Centrally on Panorama
- Configure Appliance-to-Appliance Encryption Using Custom Certificates Centrally on Panorama
- View WildFire Cluster Status Using Panorama
- Upgrade a Cluster Centrally on Panorama with an Internet Connection
- Upgrade a Cluster Centrally on Panorama without an Internet Connection
-
-
- Manage Licenses on Firewalls Using Panorama
-
- Supported Updates
- Schedule a Content Update Using Panorama
- Upgrade Log Collectors When Panorama Is Internet-Connected
- Upgrade Log Collectors When Panorama Is Not Internet-Connected
- Upgrade Firewalls When Panorama Is Internet-Connected
- Upgrade Firewalls When Panorama Is Not Internet-Connected
- Upgrade a ZTP Firewall
- Revert Content Updates from Panorama
-
- Preview, Validate, or Commit Configuration Changes
- Enable Automated Commit Recovery
- Compare Changes in Panorama Configurations
- Manage Locks for Restricting Configuration Changes
- Add Custom Logos to Panorama
- Use the Panorama Task Manager
- Reboot or Shut Down Panorama
- Configure Panorama Password Profiles and Complexity
-
-
- Verify Panorama Port Usage
- Resolve Zero Log Storage for a Collector Group
- Replace a Failed Disk on an M-Series Appliance
- Replace the Virtual Disk on an ESXi Server
- Replace the Virtual Disk on vCloud Air
- Migrate Logs to a New M-Series Appliance in Log Collector Mode
- Migrate Logs to a New M-Series Appliance in Panorama Mode
- Migrate Logs to a New M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Logs to the Same M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Log Collectors after Failure/RMA of Non-HA Panorama
- Regenerate Metadata for M-Series Appliance RAID Pairs
- View Log Query Jobs
- Troubleshoot Commit Failures
- Troubleshoot Registration or Serial Number Errors
- Troubleshoot Reporting Errors
- Troubleshoot Device Management License Errors
- Troubleshoot Automatically Reverted Firewall Configurations
- Complete Content Update When Panorama HA Peer is Down
- View Task Success or Failure Status
- Downgrade from Panorama 10.0
End-of-Life (EoL)
Configure a Custom Certificate for a Panorama Managed WildFire Appliance
Configure secure server communication for the WildFire® appliance
and secure client communication for firewalls and Panorama™ through
the Panorama user interface.
If you use Panorama™ to manage your WildFire® appliance
or WildFire cluster, you can configure custom certificate authentication through the
Panorama web interface instead of using WildFire appliance CLI.
The firewall or Panorama uses this connection to forward samples
to WildFire for analysis.
This procedure describes how to
install a unique certificate on a single WildFire appliance. If
the WildFire appliance is part of a cluster, that device and each cluster
member has a unique client certificate. To deploy a single certificate
to all WildFire appliances in the cluster, see Configure
Authentication with a Single Custom Certificate for a WildFire Cluster.
- Obtain key pairs and certificate authority (CA) certificates for the WildFire appliance and the firewall.
- Import the CA certificate to validate the identity of
the firewall and the key pair for the WildFire appliance.
- Select PanoramaCertificate ManagementCertificatesImport.
- Import the CA certificate and the key pair on Panorama.
- Configure a certificate profile that includes the root
CA and intermediate CA. This certificate profile defines how the
WildFire appliance and the firewalls authenticate mutually.
- Select PanoramaCertificate ManagementCertificate Profile.
- Configure a certificate profile.If you configure an intermediate CA as part of the certificate profile, you must also include the root CA.
- Configure an SSL/TLS profile for the WildFire appliance. PAN-OS 8.0 and later releases support only TLS 1.2 and higher so ou must set the max version to TLS 1.2 or max.
- Select PanoramaCertificate ManagementSSL/TLS Service Profile.
- Configure an SSL/TLS service profile to define the certificate and protocol that the WildFire appliance and its the firewalls use for SSL/TLS services.
- Configure Secure Server Communication on WildFire.
- Select PanoramaManaged WildFire Clusters or PanoramaManaged WildFire Appliances and select a cluster or appliance.
- Select Communication.
- Enable the Customize Secure Server Communication feature.
- Select the SSL/TLS Service Profile. This SSL/TLS service profile applies to all SSL connection between the WildFire appliance and the firewall or Panorama.
- Select the Certificate Profile you configured for communication between the WildFire appliance and the firewall or Panorama.
- Verify that Custom Certificates Only is disabled (cleared). This allows the WildFire appliance to continue communicating with the firewalls with the predefined certificate while migrating to custom certificates.
- (Optional) Configure an authorization list.
- Add an Authorization List.
- Select the Subject or Subject Alt Name configured in the certificate profile as the Identifier type.
- Enter the Common Name if the identifier is Subject or enter an IP address, hostname, or email if the identifier is Subject Alt Name.
- Click OK.
- Enable Check Authorization List to enforce the list.
- Click OK.
- Commit your changes.
- Import the CA certificate to validate the certificate
for the WildFire appliance.
- Log in to the firewall web interface.
- Import the CA certificate.
- Configure a local or SCEP certificate for the firewall.
- If you are using a local certificate, import the key pair for the firewall.
- If you are using SCEP for the firewall certificate, configure a SCEP profile.
- Configure the certificate profile for the firewall or
Panorama. You can configure this profile on each client firewall or
Panorama appliance individually or you can use a template to push
the configuration from Panorama to managed firewalls.
- Select DeviceCertificate ManagementCertificate Profile for firewalls or PanoramaCertificate ManagementCertificate Profile for Panorama.
- Configure a Certificate Profile.
- Deploy custom certificates on each firewall or Panorama
appliance.
- Log in to the firewall web interface.
- Select DeviceSetupManagement for a firewall or PanoramaSetupManagement for Panorama and Edit the Secure Communication Settings.
- Select the Certificate Type, Certificate, and Certificate Profile.
- In the Customize Communication settings, select WildFire Communication.
- Click OK.
- Commit your changes.
- After deploying custom certificates on all managed devices,
enforce custom-certificate authentication.
- Log in to Panorama.
- Select PanoramaManaged WildFire Clusters or PanoramaManaged WildFire Appliances and select a cluster or appliance.
- Select Communication.
- Select Custom Certificate Only.
- Click OK.
- Commit your changes.
After committing this change, WildFire immediately begins the enforcement of custom certificates.