Use Case: High Bandwidth Native IP Branch Site Configuration
Table of Contents
Use Case: High Bandwidth Native IP Branch Site Configuration
In this use case, we are going to configure non-IPsec (native IP) Remote Networks to
onboard large campuses and branch sites with high bandwidth up to 20 Gbps per region per
customer. The traffic must be routed back to the Service Provider for security policy
enforcement. The deployment supports IPv4 with overlapping IPs across child tenants. The
customer wants to have hybrid deployments with both IPsec and non-IPsec RNs across
regions.
- Configure the Egress path as Egress back to the service provider network.
- Create a shared interconnect on the SP host project for traffic egress.
- Configure SP IP Pool using Bring Your Own IP configuration.
- Configure additional VLAN Attachments for each region and also for HA.
- Create per-tenant interconnect for all the child customer projects for traffic ingress.
- Onboard Remote Network and select PA Connect as the traffic type and select the required region.