>
    Configure a Cluster and Add Nodes Locally
    Focus
    Download PDF
    Focus
    1. Home
    2. Advanced WildFire Powered by Precision AI™
    3. WildFire Appliance Clusters
    4. Configure a Cluster Locally on WildFire Appliances
    5. Configure a Cluster and Add Nodes Locally
    Download PDF
    Advanced WildFire Powered by Precision AI™

    Configure a Cluster and Add Nodes Locally

    Table of Contents

    Configure a Cluster and Add Nodes Locally

    Where Can I Use This?What Do I Need?
    • WildFire Appliance
    • WildFire License
    When you add nodes to a cluster, the cluster automatically sets up communication between nodes based on the interfaces you configure for the controller node.
    1. Ensure that each WildFire appliance that you want to add to the cluster is running PAN-OS 8.0.1 or later.
      On each WildFire appliance, run:
      admin@WF-500> show system info | match version
    2. Verify that the WildFire appliances are not analyzing samples and are in standalone state (not members of another cluster).
      1. On each appliance, display whether the appliance is analyzing samples:
        admin@WF-500> show wildfire global sample-analysis
        No sample should show as pending. All samples should be in a finished state. If samples are pending, wait for them to finish analysis. Pending samples display separately from malicious and non-malicious samples. Finish Date displays the date and time the analysis finished.
      2. On each appliance, verify that the all processes are running:
        admin@WF-500> show system software status
      3. On each appliance, check to ensure the appliance is in a standalone state and does not already belong to a cluster:
        admin@WF-500> show cluster membership 
Service Summary:  wfpc signature 
Cluster name: 
Address:          10.10.10.100 
Host name:        WF-500 
Node name:        wfpc-000000000000-internal 
Serial number:    000000000000 
Node mode:        stand_alone 
Server role:      True 
HA priority: 
Last changed:     Mon, 06 Mar 2017 16:34:25 -0800 
Services:         wfcore signature wfpc infra 
Monitor status: 
                  Serf Health Status: passing 
                      Agent alive and reachable 
Application status: 
                  global-db-service: ReadyStandalone 
                  wildfire-apps-service: Ready 
                  global-queue-service: ReadyStandalone 
                  wildfire-management-service: Done 
                  siggen-db: ReadyMaster 
Diag report: 
                  10.10.10.100: reported leader '10.10.10.100', age 0. 
                  10.10.10.100: local node passed sanity check.
        The highlighted lines show that the node is in standalone mode and is ready to be converted from a standalone appliance to a cluster node.
        The 12-digit serial number in these examples (000000000000) is a generic example and is not a real serial number. WildFire appliances in your network have unique, real serial numbers.
    3. Configure the primary controller node.
      This includes configuring the node as the primary controller of the HA pair, enabling HA, and defining the interfaces the appliance uses for the HA control link and for cluster communication and management.
      1. Enable high availability and configure the control link interface connection to the controller backup node, for example, on interface eth3:
        admin@WF-500# set deviceconfig high-availability enabled yes interface ha1 port eth3 peer-ip-address <secondary-node-eth3-ip-address>
      2. Configure the appliance as the primary controller node:
        admin@WF-500# set deviceconfig high-availability election-option priority primary
      3. (Optional) Configure the backup high-availability interface between the controller node and the controller backup node, for example, on the management interface:
        admin@WF-500# set deviceconfig high-availability interface ha1-backup port management peer-ip-address <secondary-node-management-ip-address>
      4. Configure the dedicated interface for communication and management within the cluster, including specifying the cluster name and setting the node role to controller node:
        admin@WF-500# set deviceconfig cluster cluster-name <name> interface eth2 mode controller
        This example uses eth2 as the dedicated cluster communication port.
        The cluster name must be a valid sub-domain name with a maximum length of 63 characters. Only lower-case characters and numbers are allowed, and hyphens and periods if they are not at the beginning or end of the cluster name.
    4. Configure the controller backup node.
      This includes configuring the node as the backup controller of the HA pair, enabling HA, and defining the interfaces the appliance uses for the HA control link and for cluster communication and management.
      1. Enable high availability and configure the control link interface connection to the primary controller node on the same interface used on the primary controller node (eth3 in this example):
        admin@WF-500# set deviceconfig high-availability enabled yes interface ha1 port eth3 peer-ip-address <primary-node-eth3-ip-address>
      2. Configure the appliance as the controller backup node:
        admin@WF-500# set deviceconfig high-availability election-option priority secondary
      3. (Recommended) Configure the backup high-availability interface between the controller backup node and the controller node, for example, on the management interface:
        admin@WF-500# set deviceconfig high-availability interface ha1-backup port management peer-ip-address <primary-node-management-ip-address>
      4. Configure the dedicated interface for communication and management within the cluster, including specifying the cluster name and setting the node role to controller node:
        admin@WF-500# set deviceconfig cluster cluster-name <name> interface eth2 mode controller
    5. Commit the configurations on both controller nodes.
      On each controller node:
      admin@WF-500# commit
      Committing the configuration on both controller nodes forms a two-node cluster.
    6. Verify the configuration on the primary controller node.
      On the primary controller node:
      admin@WF-500(active-controller)> show cluster membership 
Service Summary:  wfpc signature 
Cluster name:     mycluster 
Address:          10.10.10.100 
Host name:        WF-500 
Node name:        wfpc-000000000000-internal 
Serial number:    000000000000 
Node mode:        controller 
Server role:      True 
HA priority:      primary 
Last changed:     Sat, 04 Mar 2017 12:52:38 -0800 
Services:         wfcore signature wfpc infra 
Monitor status: 
                  Serf Health Status: passing 
                      Agent alive and reachable 
Application status: 
                  global-db-service: JoinedCluster 
                  wildfire-apps-service: Ready 
                  global-queue-service: JoinedCluster 
                  wildfire-management-service: Done 
                  siggen-db: ReadyMaster 
Diag report: 
                  10.10.10.110: reported leader '10.10.10.100', age 0. 
                  10.10.10.100: local node passed sanity check.
      The prompt (active-controller) and the highlighted Application status lines show that the node is in controller mode, is ready, and is the primary controller node.
    7. Verify the configuration on the secondary controller node.
      On the secondary controller node:
      admin@WF-500(passive-controller)> show cluster membership 
Service Summary:  wfpc signature
Cluster name:     mycluster
Address:          10.10.10.110
Host name:        WF-500
Node name:        wfpc-000000000000-internal
Serial number:    000000000000
Node mode:        controller
Server role:      True
HA priority:      secondary
Last changed:     Fri, 02 Dec 2016 16:25:57 -0800
Services:         wfcore signature wfpc infra
Monitor status: 
                  Serf Health Status: passing 
                      Agent alive and reachable 
Application status: 
                  global-db-service: JoinedCluster 
                  wildfire-apps-service: Ready 
                  global-queue-service: JoinedCluster 
                  wildfire-management-service: Done 
                  siggen-db: ReadySlave 
Diag report: 
                  10.10.10.110: reported leader '10.10.10.100', age 0. 
                  10.10.10.110: local node passed sanity check.
      The prompt (passive-controller) and the highlighted Application status lines show that the node is in controller mode, is ready, and is the backup controller node.
    8. Test the node configuration.
      Verify that the controller node API keys are viewable globally:
      admin@WF-500(passive-controller)> show wildfire global api-keys allService Summary: wfpc signatureCluster name: mycluster
      The API keys for both appliances should be viewable.
    9. Manually synchronize the high availability configurations on the controller nodes.
      Synchronizing the controller nodes ensures that the configurations match and should only need to be done one time. After the high availability configurations are synchronized, the controller nodes keep the configurations synchronized and you do not need to synchronize them again.
      1. On the primary controller node, synchronize the high availability configuration to the remote peer controller node:
        admin@WF-500(active-controller)> request high-availability sync-to-remote running-config
        If there is a mismatch between the primary controller node’s configuration and the configuration on the controller backup node, the configuration on the primary controller node overrides the configuration on the controller backup node.
      2. Commit the configuration:
        admin@WF-500# commit
    10. Verify that the cluster is functioning properly.
      To verify firewall-related information, you must first connect at least one firewall to a cluster node by selecting DeviceSetupWildFire and editing the General Settings to point to the node.
      1. Display the cluster peers to ensure that both controllers are cluster members:
        admin@WF-500(active-controller)> show cluster all-peers
      2. Display API keys from both nodes (if you created API keys), from either controller node:
        admin@WF-500(active-controller)> show wildfire global api-keys all
      3. Access any sample from either controller node:
        admin@WF-500(active-controller)> show wildfire global sample-status sha256 equal <value>
      4. Firewalls can register and upload files to both nodes. Confirm that the firewall is successfully forwarding samples.
      5. Both nodes can download and analyze files.
      6. All files analyzed after the cluster was created show two storage locations, one on each node.
    11. (Optional) Configure a worker node and add it to the cluster.
      Worker nodes use the controller node’s settings so that the cluster has a consistent configuration. You can add up to 18 worker nodes to a cluster for a total of 20 nodes in a cluster.
      1. On the primary controller node, add the worker to the controller node’s worker list:
        admin@WF-500(active-controller)> configure 
admin@WF-500(active-controller)# set deviceconfig cluster mode controller worker-list <ip>
        The <ip> is the cluster management interface IP address of the worker node you want to add to the cluster. Use separate commands to add each worker node to the cluster.
      2. Commit the configuration the controller node:
        admin@WF-500(active-controller)# commit
      3. On the WildFire appliance you want to convert to a cluster worker node, configure the cluster to join, set the cluster communications interface, and place the appliance in worker mode:
        admin@WF-500> configure 
admin@WF-500# set deviceconfig cluster cluster-name <name> interface eth2 mode worker
        The cluster communications interface must be the same interface specified for intracluster communications on the controller nodes. In this example, eth2 is the interface configured on the controller nodes for cluster communication.
      4. Commit the configuration on the worker node:
        admin@WF-500# commit
      5. Wait for all services to come up on the worker node. Run show cluster membership and check the Applicationstatus, which shows all services and the siggen-db in a Ready state when all services are up.
      6. On either cluster controller node, check to ensure that the worker node was added:
        admin@WF-500> show cluster all-peers
        The worker node you added appears in the list of cluster nodes. If you accidentally added the wrong WildFire appliance to a cluster, you can Remove a Node from a Cluster Locally.
    12. Verify the configuration on the worker node.
      1. On the worker node, check to ensure that the Node mode field shows that the node is in worker mode:
        admin@WF-500> show cluster membership
      2. Verify that firewalls can register on the worker node and that the worker node can download and analyze files.

    © 2024 Palo Alto Networks, Inc. All rights reserved.