: Install the PA-5200 Series Firewall in a 19-inch Equipment Rack
Focus
Focus

Install the PA-5200 Series Firewall in a 19-inch Equipment Rack

Table of Contents

Install the PA-5200 Series Firewall in a 19-inch Equipment Rack

Learn how to install the PA-5200 Series firewall in a two-post or four-post equipment rack.
The following procedure describes how to install the PA-5200 Series firewall in a two-post or four-post equipment rack.
When installing the firewall in a two-post equipment rack, ensure that the rack is properly anchored and can support the weight of the installed equipment.
  1. Attach one rack-mount bracket to each side of the firewall using nine #8-32 x 5/16” screws for each bracket and torque to 15 in-lbs. For a two-post rack, we recommend you install the front brackets in the mid-mount position as shown. You can also install the brackets in the front-mount position if you Install the Four-Post Rack Kit on a PA-5200 Series Firewall.
  2. With help from two other people, hold the firewall in place in the rack and secure the rack-mount brackets to the rack using four screws for each bracket. Use the appropriate screws (#10-32 x 3/4” or #12-24 x 1/2”) for your rack and torque to 25 in-lbs. Use cage nuts (not provided) to secure the screws if the rack has square holes.