Integrate IoT Security with Cisco ISE pxGrid
Table of Contents
Expand all | Collapse all
-
- Integrate IoT Security with AIMS
- Set up AIMS for Integration
- Set up IoT Security and XSOAR for AIMS Integration
- Send Work Orders to AIMS
- Integrate IoT Security with Microsoft SCCM
- Set up Microsoft SCCM for Integration
- Set up IoT Security and XSOAR for SCCM Integration
- Integrate IoT Security with Nuvolo
- Set up Nuvolo for Integration
- Set up IoT Security and XSOAR for Nuvolo Integration
- Send Security Alerts to Nuvolo
- Send Vulnerabilities to Nuvolo
- Integrate IoT Security with ServiceNow
- Set up ServiceNow for Integration
- Set up IoT Security and XSOAR for ServiceNow Integration
- Send Security Alerts to ServiceNow
- Send Vulnerabilities to ServiceNow
- Integrate IoT Security with ServiceNow Service Graph Connector
-
- Integrate IoT Security with Cortex XDR
- Set up Cortex XDR for Integration
- Set up IoT Security and XSOAR for XDR Integration
- Integrate IoT Security with CrowdStrike
- Set up CrowdStrike for Integration
- Set up IoT Security and XSOAR for CrowdStrike Integration
- Integrate IoT Security with Microsoft Defender XDR
- Set up Microsoft Defender XDR for Integration
- Set up IoT Security and Cortex XSOAR for Microsoft Defender XDR Integration
- Integrate IoT Security with Tanium
- Set up Tanium for Integration
- Set up IoT Security and XSOAR for Tanium Integration
-
- Integrate IoT Security with Aruba AirWave
- Set up Aruba AirWave for Integration
- Set up IoT Security and Cortex XSOAR for Aruba AirWave Integration
- View Device Location Information
- Integrate IoT Security with Aruba Central
- Set up Aruba Central for Integration
- Set up IoT Security and XSOAR for Aruba Central Integration
- Integrate IoT Security with Cisco DNA Center
- Set up Cisco DNA Center to Connect with XSOAR Engines
- Set up IoT Security and XSOAR for DNA Center Integration
- Integrate IoT Security with Cisco Meraki Cloud
- Set up Cisco Meraki Cloud for Integration
- Set up IoT Security and XSOAR for Cisco Meraki Cloud
- Integrate IoT Security with Cisco Prime
- Set up Cisco Prime to Accept Connections from IoT Security
- Set up IoT Security and XSOAR for Cisco Prime Integration
- Integrate IoT Security with Network Switches for SNMP Discovery
- Set up IoT Security and Cortex XSOAR for SNMP Discovery
- Integrate IoT Security with Switches for Network Discovery
- Set up IoT Security and Cortex XSOAR for Network Discovery
-
- Integrate IoT Security with Aruba WLAN Controllers
- Set up Aruba WLAN Controllers for Integration
- Set up IoT Security and XSOAR for Aruba WLAN Controllers
- Integrate IoT Security with Cisco WLAN Controllers
- Set up Cisco WLAN Controllers for Integration
- Set up IoT Security and XSOAR for Cisco WLAN Controllers
-
- Integrate IoT Security with Aruba ClearPass
- Set up Aruba ClearPass for Integration
- Set up IoT Security and XSOAR for ClearPass Integration
- Put a Device in Quarantine Using Aruba ClearPass
- Release a Device from Quarantine Using Aruba ClearPass
- Integrate IoT Security with Cisco ISE
- Set up Cisco ISE to Identify IoT Devices
- Set up Cisco ISE to Identify and Quarantine IoT Devices
- Configure ISE Servers as an HA Pair
- Set up IoT Security and XSOAR for Cisco ISE Integration
- Put a Device in Quarantine Using Cisco ISE
- Release a Device from Quarantine Using Cisco ISE
- Apply Access Control Lists through Cisco ISE
- Integrate IoT Security with Cisco ISE pxGrid
- Set up Integration with Cisco ISE pxGrid
- Put a Device in Quarantine Using Cisco ISE pxGrid
- Release a Device from Quarantine Using Cisco ISE pxGrid
- Integrate IoT Security with Forescout
- Set up Forescout for Integration
- Set up IoT Security and XSOAR for Forescout Integration
- Put a Device in Quarantine Using Forescout
- Release a Device from Quarantine Using Forescout
-
- Integrate IoT Security with Qualys
- Set up QualysGuard Express for Integration
- Set up IoT Security and XSOAR for Qualys Integration
- Perform a Vulnerability Scan Using Qualys
- Get Vulnerability Scan Reports from Qualys
- Integrate IoT Security with Rapid7
- Set up Rapid7 InsightVM for Integration
- Set up IoT Security and XSOAR for Rapid7 Integration
- Perform a Vulnerability Scan Using Rapid7
- Get Vulnerability Scan Reports from Rapid7
- Integrate IoT Security with Tenable
- Set up Tenable for Integration
- Set up IoT Security and XSOAR for Tenable Integration
- Perform a Vulnerability Scan Using Tenable
- Get Vulnerability Scan Reports from Tenable
Integrate IoT Security with Cisco ISE pxGrid
Integrate IoT Security through pxGrid with Cisco ISE
to provide network access control (NAC) to IoT devices.
IoT Security is an IoT (Internet of Things)
security solution that uses deep machine learning to discover and
categorize every IoT device on your network. It creates a baseline
of normal behavior for each individual IoT device, continuously
monitors for anomalous behavior, and then alerts administrators
whenever it finds such anomalies.
Cisco pxGrid (Platform Exchange
Grid) is a platform that enables various network security products
to share information so they can discover and respond to threats
quickly. A pxGrid controller coordinates connections among partner
nodes and runs on Cisco ISE (Identity Services Engine), a product
for creating and enforcing network access and security policies.
The pxGrid controller provides a means for partners to publish services
to ISE and other connected nodes and subscribe to services from
them.
You can integrate IoT Security through Cortex XSOAR
and pxGrid with Cisco ISE. By integrating these solutions, you can
respond to security alerts by quarantining IoT devices to mitigate
risk and later removing them from quarantine after the threat subsides.
Ensure
the XSOAR engine can form an HTTPS connection to your Cisco pxGrid controller/ISE
instance on TCP port 8910. The engine uses this port when authenticating
with pxGrid and when sending it IoT device data and quarantine commands. In
addition, ensure that the XSOAR engine can form an HTTP connection
on TCP port 443 with Cortex XSOAR.
In a distributed environment,
multiple firewalls report metadata to the IoT Security Cloud, which
then sends it through Cortex XSOAR to the XSOAR engine designated
to communicate through pxGrid to the ISE admin node.
Integrating with Cisco ISE pxGrid requires either a full-featured Cortex XSOAR server
or the purchase and activation of an IoT Security third-party integration add-on license, which comes with a free cohosted Cortex XSOAR instance. The basic
plan includes a license for three integration add-ons, one of which can be used for
this. The advanced plan includes a license for all supported third-party
integrations.