ION 1000 Ports
Table of Contents
ION 1000 Ports
The ports on the ION 1000 are used for LAN, WAN, and internet connectivity. The AUX port
is used for offline access, configuration, and troubleshooting.
Deploy the ION 1000 in a standalone fashion without a data center device, thereby,
enabling granular control and visibility for direct-to-internet deployment
scenarios.
The ports on the ION 1000 are used as
follows:
Ports | Description |
|---|---|
AUX | This port is an auxiliary access port intended
for offline access, configuration, and troubleshooting of a system
during installation. |
Internet/LAN/WAN Ports | Ports 1- 4 are individual ports, used for internet,
local area network (LAN), or multi-path label switching (MPLS) connectivity. By
default, all ports 1- 4 are DHCP-enabled ports. On the LAN port,
configure the application reachability probe to
monitor the reachability of an application on a given path. If you
do not configure a port for the application probe, an alarm is raised to indicate
that application probe is disabled. |