: Power on the ION 1000
Focus
Focus

Power on the ION 1000

Table of Contents

Power on the ION 1000

Power on the ION 1000.
Connect the power cables to the ION device and plug the device power cable into an AC power outlet. When you switch on the power, the device is powered on and the power indicator turns green.

Reboot the ION 1000

Press the power switch 3 or 4 times to reboot the ION 1000.

Shut Down the ION 1000

Shut down the ION 1000 in the following ways:
Do not shut down the ION devices abruptly by pulling the power cord.
  • Shut down using the Device Toolkit commands
    Run the device toolkit command debug shutdown to shut down the device.
    Ensure the device is physically accessible to turn it back on, before executing the command.
  • Shut down using the Power Switch
    Press the power switch 5 times (press and hold for 1 second, then, release) to shut down the device.
  • Shut down using a Python script
    Gracefully shut down a single ION device or multiple ION devices using a script.
    First generate an API token and add it to cloudgenix_settings.py and then execute the command ./shutdown.py --serial <20-019291-9468>. To shut down multiple devices, add the serial numbers of the ION devices as shown below:
    ./shutdown.py --serial 20-019291-9468 ./shutdown.py --serial 20-019291-9469 ./shutdown.py --serial 20-019291-9470