Create Objects for Use in Shared or Device Group Policy
Table of Contents
9.1 (EoL)
Expand all | Collapse all
-
- Determine Panorama Log Storage Requirements
-
- Setup Prerequisites for the Panorama Virtual Appliance
- Perform Initial Configuration of the Panorama Virtual Appliance
- Set Up The Panorama Virtual Appliance as a Log Collector
- Set Up the Panorama Virtual Appliance with Local Log Collector
- Set up a Panorama Virtual Appliance in Panorama Mode
- Set up a Panorama Virtual Appliance in Management Only Mode
-
- Preserve Existing Logs When Adding Storage on Panorama Virtual Appliance in Legacy Mode
- Add a Virtual Disk to Panorama on an ESXi Server
- Add a Virtual Disk to Panorama on vCloud Air
- Add a Virtual Disk to Panorama on AWS
- Add a Virtual Disk to Panorama on Azure
- Add a Virtual Disk to Panorama on Google Cloud Platform
- Add a Virtual Disk to Panorama on KVM
- Add a Virtual Disk to Panorama on Hyper-V
- Mount the Panorama ESXi Server to an NFS Datastore
-
- Increase CPUs and Memory for Panorama on an ESXi Server
- Increase CPUs and Memory for Panorama on vCloud Air
- Increase CPUs and Memory for Panorama on AWS
- Increase CPUs and Memory for Panorama on Azure
- Increase CPUs and Memory for Panorama on Google Cloud Platform
- Increase CPUs and Memory for Panorama on KVM
- Increase CPUs and Memory for Panorama on Hyper-V
- Complete the Panorama Virtual Appliance Setup
-
- Convert Your Evaluation Panorama to a Production Panorama with Local Log Collector
- Convert Your Evaluation Panorama to a Production Panorama without Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing with Local Log Collector
- Convert Your Evaluation Panorama to VM-Flex Licensing without Local Log Collector
- Convert Your Production Panorama to an ELA Panorama
-
- Register Panorama
- Activate a Panorama Support License
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is Internet-connected
- Activate/Retrieve a Firewall Management License when the Panorama Virtual Appliance is not Internet-connected
- Activate/Retrieve a Firewall Management License on the M-Series Appliance
- Install the Panorama Device Certificate
-
- Migrate from a Panorama Virtual Appliance to an M-Series Appliance
- Migrate a Panorama Virtual Appliance to a Different Hypervisor
- Migrate from an M-Series Appliance to a Panorama Virtual Appliance
- Migrate from an M-100 Appliance to an M-500 Appliance
- Migrate from an M-100 or M-500 Appliance to an M-200 or M-600 Appliance
-
- Configure an Admin Role Profile
- Configure an Access Domain
-
- Configure a Panorama Administrator Account
- Configure Local or External Authentication for Panorama Administrators
- Configure a Panorama Administrator with Certificate-Based Authentication for the Web Interface
- Configure an Administrator with SSH Key-Based Authentication for the CLI
- Configure RADIUS Authentication for Panorama Administrators
- Configure TACACS+ Authentication for Panorama Administrators
- Configure SAML Authentication for Panorama Administrators
-
- Add a Firewall as a Managed Device
-
- Add a Device Group
- Create a Device Group Hierarchy
- Create Objects for Use in Shared or Device Group Policy
- Revert to Inherited Object Values
- Manage Unused Shared Objects
- Manage Precedence of Inherited Objects
- Move or Clone a Policy Rule or Object to a Different Device Group
- Push a Policy Rule to a Subset of Firewalls
- Manage the Rule Hierarchy
- Manage the Master Key from Panorama
- Redistribute User-ID Information to Managed Firewalls
-
- Plan the Transition to Panorama Management
- Migrate a Firewall to Panorama Management and Reuse Existing Configuration
- Migrate a Firewall to Panorama Management and Push a New Configuration
- Migrate a Firewall HA Pair to Panorama Management and Reuse Existing Configuration
- Migrate a Firewall HA Pair to Panorama Management and Push a New Configuration
- Load a Partial Firewall Configuration into Panorama
- Localize a Panorama Pushed Configuration on a Managed Firewall
-
- Add Standalone WildFire Appliances to Manage with Panorama
- Configure Basic WildFire Appliance Settings on Panorama
- Remove a WildFire Appliance from Panorama Management
-
-
- Configure a Cluster and Add Nodes on Panorama
- Configure General Cluster Settings on Panorama
- Remove a Cluster from Panorama Management
- Configure Appliance-to-Appliance Encryption Using Predefined Certificates Centrally on Panorama
- Configure Appliance-to-Appliance Encryption Using Custom Certificates Centrally on Panorama
- View WildFire Cluster Status Using Panorama
- Upgrade a Cluster Centrally on Panorama with an Internet Connection
- Upgrade a Cluster Centrally on Panorama without an Internet Connection
-
-
- Manage Licenses on Firewalls Using Panorama
-
- Supported Updates
- Schedule a Content Update Using Panorama
- Upgrade Log Collectors When Panorama Is Internet-Connected
- Upgrade Log Collectors When Panorama Is Not Internet-Connected
- Upgrade Firewalls When Panorama Is Internet-Connected
- Upgrade Firewalls When Panorama Is Not Internet-Connected
- Upgrade a ZTP Firewall
- Revert Content Updates from Panorama
-
- Preview, Validate, or Commit Configuration Changes
- Enable Automated Commit Recovery
- Compare Changes in Panorama Configurations
- Manage Locks for Restricting Configuration Changes
- Add Custom Logos to Panorama
- Use the Panorama Task Manager
- Reboot or Shut Down Panorama
- Configure Panorama Password Profiles and Complexity
-
-
- Verify Panorama Port Usage
- Resolve Zero Log Storage for a Collector Group
- Replace a Failed Disk on an M-Series Appliance
- Replace the Virtual Disk on an ESXi Server
- Replace the Virtual Disk on vCloud Air
- Migrate Logs to a New M-Series Appliance in Log Collector Mode
- Migrate Logs to a New M-Series Appliance in Panorama Mode
- Migrate Logs to a New M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Logs to the Same M-Series Appliance Model in Panorama Mode in High Availability
- Migrate Log Collectors after Failure/RMA of Non-HA Panorama
- Regenerate Metadata for M-Series Appliance RAID Pairs
- Troubleshoot Registration or Serial Number Errors
- Troubleshoot Reporting Errors
- Troubleshoot Device Management License Errors
- Troubleshoot Automatically Reverted Firewall Configurations
- Complete Content Update When Panorama HA Peer is Down
- View Task Success or Failure Status
- Restore an Expired Device Certificate
- Downgrade from Panorama 9.1
End-of-Life (EoL)
Create Objects for Use in Shared or Device Group Policy
You can use an object in any policy rule that
is in the Shared location, or in the same device group as the object,
or in descendants of that device group (for details, see Device Group Objects).
Shared
device group objects can be viewed and referenced in a specific
device group. Changing the name of a Shared device group object
in one device group changes the name of the Shared object in all
device groups. This includes any configuration the Shared object
is referenced, such as in Policy rules. Changing the name of a Shared
device group object may cause the configuration push to managed
firewalls to fail.
For example, you create a Shared object
named ObjectA and create a Security policy rule in the DG1 device
group where ObjectA is referenced. This configuration is pushed
to your managed firewalls. Later in the DG1 device group, you change
the name of ObjectA to ObjectB and try to push the configuration
to your managed firewalls. This push fails because your managed
firewalls have the Shared object with the name ObjectA as part of
their configuration, and are expecting that configuration object
to have the same name.
See Use Dynamic Address Groups in
Policy to verify the number of supported registered IP addresses
on Panorama if you intended to leverage dynamic address groups in
order to create policies that automatically adapt to changes in
your network.
- Create a shared object.In this example, we add a shared object for URL Filtering categories for which we want to trigger alerts.
- Select the ObjectsSecurity ProfilesURL Filtering tab
and click Add.The Objects tab appears only after you Add a Device Group (at least one).
- Enter a Name and a Description.
- Select Shared.
- The Disable Override option is cleared by default, which means you can override inherited instances of the object in all device groups. To disable overrides for the object, select the check box.
- In the Categories tab, select every Category for which you want notification.
- In the Action column, select Alert.
- Click OK to save your changes to the object.
- Select CommitCommit to Panorama and Commit your changes.
- Select the ObjectsSecurity ProfilesURL Filtering tab
and click Add.
- Create a device group object.In this example, we add an address object for specific web servers on your network.
- Select ObjectsAddresses and select the Device Group in which you will use the object.
- Click Add and enter a Name to identify the object.
- Be sure to leave the Shared option cleared.
- The Disable Override option is cleared by default, which means you can override inherited instances of the object in device groups that are descendants of the selected Device Group. To disable overrides for the object, select the Disable Override option.
- Select the Type of address object and the associated value. For example, select IP Range and enter the IP address range for the web servers.
- Click OK to save your changes to the object.
- Select CommitCommit and Push and then Commit
and Push your changes to the Panorama configuration
and to the device group where you added the object.When you activate an antivirus license on a firewall, a list of predefined IP lists are automatically added to the firewall. As a result, this reduces the total number of individual address objects, dynamic groups, external IP lists, predefined IP block lists, and external predefined IP lists you can push from Panorama.
- View shared objects and device group objects in Panorama.In the pages of the Objects tab, the Location column indicates whether an object is shared or is specific to a device group.
- In the Objects tab, select the object type (ObjectsAddresses, in this example).
- Select the Device Group to
which you added the object.The Objects tab only displays objects that are in the selected Device Group or are inherited from an ancestor device group or the Shared location.
- Verify that the device group object appears. Note that the device group name in the Location column matches the selection in the Device Group drop-down.