Focus

VM-Series Deployment Guide

Configure an Interface Policy for LLDP and LACP for North-South Traffic

Table of Contents

Configure an Interface Policy for LLDP and LACP for North-South Traffic

Create policy that enables LLDP and LACP on the ACI interfaces that connect to your firewall.

LLDP is necessary for forwarding to work correctly in the ACI environment; ACI does not deploy a subnet router interface on a leaf switch unless it detects an endpoint on the switch that requires one. LLDP helps determine if a subnet router interface is required.

LACP provides greater resiliency and recovery speed on a link failure.

Create an LLDP Interface Policy.
1. Select FabricAccess PoliciesInterface PoliciesPoliciesLLDP Interface.
2. Right-click on LLDP Interface and select Create LLDP Interface Policy.
3. Enter a descriptive Name for your LLDP interface policy.
4. Select Enabled for Receive State.
5. Select Enabled for Transmit State.
6. Click Submit.
Create a Port Channel policy to enable LACP.
1. Select FabricAccess PoliciesInterface PoliciesPoliciesPort Channel.
2. Right-click on Port Channel and select Create Port Channel Policy.
3. Enter a descriptive Name for your port channel policy.
4. Select LACP Active from the Mode drop-down.
5. Click Submit.

Create a VLAN Pool and External Routed Domain

Create an External Routed Network