: Provision Panorama
Focus
Focus

Provision Panorama

Table of Contents
End-of-Life (EoL)

Provision Panorama

Use the CSP to provision Panorama form Software NGFW credits deployment profile view.
This option is only visible if you selected Panorama when the deployment profile was created. You can edit the profile, if necessary.
  1. Select ProductsAssetsSoftware NGFW Credits and click the Details button on the credit pool you used to create your profile.
  2. On the far right, select the vertical ellipsis (More Options) and select Provision Panorama, and Provision. You see the list of firewalls provisioned for the current deployment profile.
    This creates a Panorama, assigns a serial number and the model type PAN-PRA-1000-CP, and registers the Panorama as an asset. The Panorama you just provisioned is the last Panorama listed. Note the auth code starts with F (so it is not the same as the deployment profile), but the expiration date is the same as your profile’s credit pool.
    Copy the serial number.
  3. From the deployment profile, View Devices, and select Panorama on the Software NGFW Devices page. This displays all SW NGFW Panoramas.
    Search By serial number using the serial number you copied.
    You can also select AssetsSoftware NGFW Devices and Search By serial number with the serial number you copied.
  4. After setting up your Panorama Virtual Appliance, add the serial number to Panorama.
    1. Log in to Panorama.
    2. Select PanoramaSetupManagementGeneral Settings and click the Edit icon.
    3. Enter the serial number you copied from the CSP in the Serial Number field.
    4. Click OK to save your changes.
    5. Commit your configuration changes.
      Select CommitCommit to Panorama and Commit your changes.