VM-Series Deployment Guide
    : IPAM
    Focus
    Download PDF
    Focus
    1. Home
    2. VM-Series
    3. VM-Series Deployment Guide
    4. Set Up the VM-Series Firewall on OpenStack
    5. Heat Templates for Service Chaining and Service Scaling
    6. IPAM
    Download PDF

    VM-Series Deployment Guide

    IPAM

    Table of Contents
    End-of-Life (EoL)

    IPAM

    IP address management (IPAM) provides the IP address information for the interfaces of the service instance. Changes these parameters to best suit your environment.
    IPAM (IPAM Config)
    NetIPam_ip_prefix_mgmtThe IP prefix of the management interface on the VM-Series firewall. The default value is 172.2.0.0.
    NetIPam_ip_prefix_len_mgmtThe IP prefix length of the management interface on the VM-Series firewall. The default value is /24.
    NetIPam_ip_prefix_leftThe IP prefix of the left interface on the VM-Series firewall. The default value is 10.10.1.0.
    NetIPam_ip_prefix_len_leftThe IP prefix length of the left interface on the VM-Series firewall. The default value is /24.
    NetIPam_ip_prefix_rightThe IP prefix of the right interface on the VM-Series firewall. The default value is 10.10.2.0.
    NetIPam_ip_prefix_len_rightThe IP prefix length of the right interface on the VM-Series firewall. The default value is /24.
    NetIPam_addr_from_start_trueThis parameter determines how IP addresses are assigned to VMs on the subnets described above. If true, any new VM takes the next available IP address. If false, any new VM is assigned an IP address at random. The default value is true.

    © 2024 Palo Alto Networks, Inc. All rights reserved.