VM-Series Deployment Guide
  • VM-Series Deployment Guide
  • All VM-Series Documentation
  • All Documentation
VM-Series Deployment Guide
: Create Address Objects for the EPGs
Focus
Download PDF
Focus
  1. Home
  2. VM-Series
  3. VM-Series Deployment Guide
  4. Set Up a Firewall in Cisco ACI
  5. Integrate the Firewall with Cisco ACI in Network Policy Mode
  6. Deploy the Firewall to Secure East-West Traffic in Network Policy Mode
  7. Create Address Objects for the EPGs
Download PDF

VM-Series Deployment Guide

Create Address Objects for the EPGs

Table of Contents
End-of-Life (EoL)
You must define address objects and map them to endpoint groups (EPGs) to be used in security policy. Address groups are the best way map security groups to a group of servers using an endpoint IP address range. Create one address object for each of your EPGs.
  1. Select ObjectsAddress and click Add.
  2. Enter a descriptive name for your address object.
  3. Select IP Netmask from the Type drop-down.
  4. Enter the IP Netmask.
  5. Click OK.
  6. Repeat this process for each EPG.
  7. Commit your changes.

Technical Documentation

Company

Legal Notices

© 2025 Palo Alto Networks, Inc. All rights reserved.