: PA-7500 Series Firewall DPC LEDs
Focus
Focus

PA-7500 Series Firewall DPC LEDs

Table of Contents

PA-7500 Series Firewall DPC LEDs

Learn how to interpret the LEDs located on the PA-7500 Series firewall Data Processing Card.
The following table describes how to interpret the status LEDs on a Data Processing Card (DPC).
LEDDescription
Service
Allows a remote administrator to illuminate the LED on a specific front-slot card so an on-site technician can locate the card.
  • Off—The firewall is operating normally.
  • Blue—The firewall is instructed by the CLI or Web Interface to enable this LED.
Power
  • Green—The firewall is powered on.
  • Off—The firewall is not powered on or an error occurred with the internal power system (for example, power is not within tolerance levels).
Status
  • Green—The firewall is operating normally.
  • Yellow—The firewall is booting.
Alarm
  • Red—A hardware failure, such as a power supply failure, a firewall failure that caused an HA failover, a drive failure, or the hardware overheated and exceeded the high temperature threshold.
  • Off—The firewall is operating normally.
Temperature
  • Green—The firewall temperature is normal.
  • Yellow—The firewall temperature is outside tolerance levels.
See the PA-7500 Series Firewall Environmental Specifications for the operating temperature range.