Create an Advanced Data Profile

1. Log in to Strata Cloud Manager.
2. Select ManageConfigurationData Loss PreventionData Profiles and Add Data ProfileAdvanced Data Profile.

   You can also create a new data profile by copying an existing data profile. This allows you to quickly modify an existing data profile with additional match criteria while preserving the original data profile from which the new data profile was copied.

   Data profiles created by copying an existing data profile are appended with Copy - <name_of_original_data_profile>. This name can be edited as needed.

   Adding an EDM data set to a copied data profile is supported only if the original data profile had an EDM data set to begin with. Adding an EDM data set to a data profile that doesn’t already have an EDM data set isn’t supported.
3. Configure the Primary Rule for the data profile.

   Data pattern match criteria for traffic that you want to allow must be added to the Primary Rule. Data pattern match criteria for traffic that you want to block can be added to either Primary Rule or Secondary Rule.

   1. Enter a descriptive Data Profile Name.
   2. Select the data pattern operator (AND or OR).
   3. Add Data Pattern.
   4. Define the data profile match criteria

      • Data Patterns
        Select AddData Pattern and define the data pattern match criteria.
        • Data Pattern—Select a custom or predefined data pattern.
          Predefined ML-based data patterns support only the Any occurrence condition with either High or Lowconfidence. You can't configure any other traffic match criteria other than the confidence level for Predefined ML-based data patterns.
        • Occurrence Condition—Specify the occurrences condition required to trigger a Security policy rule action.
          • Any—Security policy rule action triggered if Enterprise DLP detects at least one instance of matched traffic.
          • Less than or equal to—Security policy rule action triggered if Enterprise DLP detects instances of matched traffic, with the maximum being the specified Count.
          • More than or equal to—Security policy rule action triggered if Enterprise DLP detects instances of matched traffic, with a minimum being the specified Count.
          • Between (inclusive)—Security policy rule action triggered if Enterprise DLP detects any number of instances of matched traffic between the specific Count range.
        • Count—Specify the number of instances of matched traffic required to trigger a Security policy rule action. Range is 1 - 500.
          For example, to match a pattern that appears three or more times in a file, select More than or equal to as the Occurrence Condition and specify 3 as the Threshold.
        • Confidence—Specify the confidence level required for a Security policy rule action to be taken (High or Low).
        • Unique Occurrences—Check (enable) to detect only unique instances of traffic matches. Only unique occurrences of traffic matches are counted toward the specified Count.
          This setting is disabled by default. Keep Unique Occurrences disabled if you want all instances of traffic matches to count toward the specified Count.
      • Data Dictionary
        Select AddDictionary and define the data dictionary match criteria.
        • Dictionary—Select a custom or predefined data pattern.
        • Occurrence Condition—Specify the occurrences condition required to trigger a Security policy rule action.
          • Any—Security policy rule action triggered if Enterprise DLP detects at least one instance of matched traffic.
          • Less than or equal to—Security policy rule action triggered if Enterprise DLP detects instances of matched traffic, with the maximum being the specified Count.
          • More than or equal to—Security policy rule action triggered if Enterprise DLP detects instances of matched traffic, with a minimum being the specified Count.
          • Between (inclusive)—Security policy rule action triggered if Enterprise DLP detects any number of instances of matched traffic between the specific Count range.
        • Count—Specify the number of instances of matched traffic required to trigger a Security policy rule action. Range is 1 - 500.
          For example, to match a pattern that appears three or more times in a file, select More than or equal to as the Occurrence Condition and specify 3 as the Threshold.
        • Confidence—Specify the confidence level required for a Security policy rule action to be taken (High or Low).
        • Unique Occurrences—Check (enable) to detect only unique instances of traffic matches. Only unique occurrences of traffic matches are counted toward the specified Count.
          This setting is disabled by default. Keep Unique Occurrences disabled if you want all instances of traffic matches to count toward the specified Count.
      • Custom Document Types
        Select AddDocument Types and define the custom document type match criteria.
        • Document Type—Select a predefined or custom document type you uploaded to Enterprise DLP.
        • Overlapping Score Condition—Specify the custom document overlapping score required to trigger a Security policy rule action.
          • Greater Than or Equal To—Security policy rule triggered if Enterprise DLP detects an instance of matched traffic with the specified minimum overlapping score.
          • Between (Inclusive)—Security policy rule action triggered if Enterprise DLP detects an instance of matched traffic with an overlapping score between the specified min and max overlapping scores.
      • EDM
        Select AddEDM Dataset and define the EDM match criteria.
        • EDM Dataset—Select an EDM data set uploaded to the DLP cloud service.
        • Occurrence Condition—Specify the occurrences condition required to trigger a Security policy rule action.
        • Count—Specify the number of instances of matched traffic required to trigger a Security policy rule action. Range is 1 - 500.
        • Configure EDM data set Primary Fields values to specify whether a Security policy rule action is taken if Any (OR) or All (AND) primary fields are matched and if Any (OR) or All (AND) secondary fields are matched.
        • (Any(OR) only) Enter the Count to specify the number of instances of matched traffic required to trigger a Security policy rule action. Range is 1 - 500.
          When you select Any (OR), the maximum Count setting is one less than the total number of fields included in the Primary Field or Secondary Field.
        • Select the Primary Fields values.
          The list of available values is populated from the selected EDM data set. You must select at least one primary field value.
          You’re required to add at least one column where the column values occurs up to 12 times in the selected EDM data set for the Primary Field. For example, if the EDM data set contains columns for first name, last name, social security number, and credit card number, add social security number and credit card in the primary field.
      • Group
        Select AddGroup to nest and group additional match criteria so you can more accurately define your compliance rules.
        When you click add a new Group, the new match criteria group is nested under the most recently added data pattern or EDM data set. You can’t nest a new match criteria group between existing data patterns or EDM data sets. If multiple data patterns or EDM data sets are added, you must remove the data patterns or EDM data sets that follow the data pattern or EDM data set for which you want to add the nested match criteria. For example, you added EDM_Dataset1, Data_Pattern2, and EDM_Dataset3 to the Primary Rule. If you wanted to added nested match criteria to Data_Pattern2, you must first remove EDM_Dataset3 from the Primary Rule.
        You can select the same data pattern or EDM data set or a different data pattern EDM data set to more accurately define your compliance rules. Nesting match criteria is supported only when the data profile includes an EDM data set. Enterprise DLP supports up to three level of additional nesting groups for each data pattern or EDM data set. You can nest additional data patterns or EDM data sets under a data pattern or EDM data set added to the Primary or Secondary Rule.
        Nested match criteria support the AND, OR, and NOT operators. Refer to the descriptions above to configure the nested match criteria.

4. (Optional) Configure a Secondary Rule.

   Data pattern match criteria added to the Secondary Rule block all traffic that meets the match criteria for the data patterns by default and can’t be modified. If you want to allow traffic that matches a data pattern match criteria, add it to the Primary Rule.
5. Review the Data Profile Preview to verify the data profile match criteria.
6. Save the data profile.

7. Test a Data Profile to verify it accurately detects the sensitive data you configured it to detect.
8. Create a Security policy rule and associate the data profile.

   • Strata Cloud Manager—Modify a DLP Rule on Strata Cloud Manager
   • SaaS Security—Create a SaaS Security Policy Recommendation to Leverage Enterprise DLP