View WAN Statistics for Multicast
Table of Contents
Expand all | Collapse all
-
-
- Add a Branch
- Add a Data Center
- Add a Branch Gateway
- Configure Circuits
- Configure Internet Circuit Underlay Link Aggregation
- Configure Private WAN Underlay Link Quality Aggregation
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Loopback Interface
- Configure a PoE Port
- Configure and Monitor LLDP Activity and Status
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
- VPN Keep-Alives
-
- Configure Prisma SD-WAN IPFIX
- Configure IPFIX Profiles and Templates
- Configure and Attach a Collector Context to a Device Interface in IPFIX
- Configure and Attach a Filter Context to a Device Interface in IPFIX
- Configure Global and Local IPFIX Prefixes
- Flow Information Elements
- Options Information Elements
- Configure the DNS Service on the Prisma SD-WAN Interface
- Configure SNMP
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- View Routing Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
- Configure Branch HA in a Hybrid Topology with Gen-1 (3000) and Gen-2 (3200) Platforms
- Prisma SD-WAN Incidents and Alerts
View WAN Statistics for Multicast
View WAN statistics for multicast traffic in Prisma SD-WAN.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
View WAN statistics for multicast traffic
between a branch site ION device and a connected data center ION device
for devices running software version 6.0.1 or higher. You can view
WAN statistics for the past hour on different links between the
branch site and the data center site.
- Select ManageSetupDevicesClaimed DevicesConfigure the deviceRoutingMulticastWAN Statistics.Expand a data center site (for a branch device) or a branch site (for a data center device) to view the WAN statistics.Since the branch site is a multicast receiver, it will not transmit information. The value for TX PKTS and TX BYTES is NA. Similarly, a data center site will only transmit information.
Field Description State Indicates if the neighborship is active between the data center ION device and the branch ION device. Uptime Indicates the time for which neighborship is active between the data center ION device and the branch ION device. Secure Fabric Indicates the VPNs used for multicast traffic between the branch site and the data center site. RX PKTS Indicates the number of multicast traffic packets received at the device interface. RX BYTES Indicates the multicast traffic in terms of bytes received at the device interface. TX PKTS Indicates the number of multicast traffic packets transmitted from the device interface. TX BYTES Indicates the multicast traffic in terms of bytes transmitted from the device interface. (Optional) Click Statistics to view the detailed statistics for the interface.You will be able to view WAN multicast statistics only after your tenant has been migrated to the new data lake infrastructure. If you cannot view statistics, contact the Palo Alto Networks Accounts Team.