Upgrade ION Device Software
Table of Contents
Expand all | Collapse all
-
-
- Add a Branch
- Add a Data Center
- Add a Branch Gateway
- Configure Circuits
- Configure Internet Circuit Underlay Link Aggregation
- Configure Private WAN Underlay Link Quality Aggregation
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Loopback Interface
- Configure a PoE Port
- Configure and Monitor LLDP Activity and Status
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
- VPN Keep-Alives
-
- Configure Prisma SD-WAN IPFIX
- Configure IPFIX Profiles and Templates
- Configure and Attach a Collector Context to a Device Interface in IPFIX
- Configure and Attach a Filter Context to a Device Interface in IPFIX
- Configure Global and Local IPFIX Prefixes
- Flow Information Elements
- Options Information Elements
- Configure the DNS Service on the Prisma SD-WAN Interface
- Configure SNMP
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- View Routing Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
- Configure Branch HA in a Hybrid Topology with Gen-1 (3000) and Gen-2 (3200) Platforms
- Prisma SD-WAN Incidents and Alerts
Upgrade ION Device Software
Schedule downloads and upgrades to start at a designated time. If you do not provide
download and upgrade time, the upgrade immediately follows the download.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
You can schedule ION device software
downloads and upgrades in a staged manner, allowing multiple attempts
within a specific period of time while eliminating interruption
to the network.
Software scheduling is not available for pre-release 5.1.1
devices. Upgrade your device to version 5.1.1 to take advantage
of scheduling downloads and upgrades.
Schedule downloads and upgrades to start at a
designated time. If you do not provide download and upgrade time,
the upgrade immediately follows the download. If you provide only
the download time, the upgrade does not immediately follow the download,
and needs to be scheduled. The download interval and the upgrade
interval serves as a limit until download or upgrade attempts are performed
respectively.
If you specify interface IDs, the device uses
the specified interface to perform the software download. If you
do not specify the interface, the ION device uses the controller
interface or any interface that is marked as use for internet. If
you specify multiple interfaces, then any available interface provided
in the list is used in random order. No interfaces outside of the
manually-specified list are used.
You can schedule upgrades and downgrades as follows:
- Upgrade without Max Upgrade Time—The ION device automatically performs the download and the upgrade sequentially at the scheduled time. If the ION device experiences an upgrade failure, it retries the download or upgrade three times before it indicates a failure.
- Upgrade with Max Upgrade Time—The ION device starts the download and the upgrade sequentially at the scheduled time. Max Upgrade Time serves as an upper limit until which the download or upgrade is tried by the ION device. If the ION device experiences an upgrade failure, it retries the download or upgrade three times before it indicates a failure. The default Max Upgrade Time is 30 minutes.
- Download without Max Download Time—The ION device performs the download at the scheduled time. If the ION device experiences a download failure, the device retries the download or upgrade three time before it indicates a failure. If there is a download failure, the device does not perform a software upgrade.
- Download with Max Download Time—The ION device performs the download at the scheduled time. The Max Download Time serves as the upper time limit until which the download is tried by the device. If the device experiences a download failure, it retries the download three times before it indicates a failure. If there is a download failure, the device does not perform a software upgrade. The default Max Download Time is 30 minutes.
- No Download and Upgrade Time Provided—The ION device performs the download and upgrade automatically.
You can cancel a software download, abort a software download,
abort a software upgrade, perform an upgrade on already downloaded
software, or retry download on software download failures. You can
also perform rollbacks to older software versions if required.